User manual PEAVEY XR 684 PLUS

[. . . ] XR 684/XR 684+ ® ® S t e r e o P ow e r e d M i xe r OWNER'S MANUAL Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance, read the operating guide for further warnings. Este símbolo tiene el propósito, de alertar al usuario de la presencia de "(voltaje) peligroso" que no tiene aislamiento dentro de la caja del producto que puede tener una magnitud suficiente como para constituir riesgo de corrientazo. [. . . ] PRESET: Selects the effect preset from the list below. EFX Presets PRESET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NAME Chamber Plate Room Cathedral Spring Gate Reverse Delay + Reverb Bright Delay Warm Delay Dark Delay Ping Pong Delay Chorus Phaser Flange Rotary Speaker TIME/SIZE Time: 150 to 5, 000 ms Time: 100 to 4, 000 ms Time: 150 to 5, 000 ms Time: 100 to 8, 000 ms Time: 150 to 5, 000 ms Time: 150 to 500 ms Time: 150 to 500 ms Time: 0 to 225 ms Time: 0 to 500 ms Time: 0 to 500 ms Time: 0 to 500 ms Time: 0 to 500 ms Rate: 0. 125 to 8 Hz Rate: 0. 250 to 16 Hz Rate: 0. 10 to 2. 5 Hz High Speed: 0. 50 to 25 Hz COLOR/TONE Damping (High Frequency) Damping (High Frequency) Damping (High Frequency) Damping (High Frequency) Damping (High Frequency) Damping (High Frequency) Damping (High Frequency) Reverb Time: 0 to 5, 000 ms Feedback: 0 to 99% Feedback: 0 to 99% Feedback: 0 to 99% Feedback: 0 to 99% Depth: Best Set Full CW Depth: Best Set Full CW Depth: Best Set Full CW Width: 0 to 100% CW 18. TIME/SIZE: In Reverb and Delay presets, this control adjusts the time of the particular reverb or delay; in Chorus, Phaser, and Flange, it adjusts the rate of each. In Rotary Speaker setting, this adjusts the speed of the speaker rotation. EFX TO MON: Controls the amount of effects signal sent to the monitor mix. This control allows effects to be heard from the stage via the monitor. EFX TO MAIN: Controls the amount of effects signal sent to the main mix. FLS® (Feedback Locator System®): These LEDs illuminate to indicate the frequency band of highest energy. If phantom power is used, do not connect unbalanced microphones or other devices that cannot handle this voltage to the XLR inputs. (Some wireless receivers may be damaged; consult their manuals for compatibility. ) The line input 1/4" jacks are not connected to the phantom supply, and are safe for all inputs (balanced or unbalanced). An unbalanced-to-balanced impedance converter, such as the Peavey 5116 or a Peavey 1:1 Interface Adapter, can also be used to isolate a mic from phantom voltage. EFX DEFEAT: This 1/4" jack accepts an on/off 1/4" footswitch (Peavey Pt. MONITOR OUTPUT: This 1/4" jack provides an output from the monitor mix to supply external power amp/monitor combinations. The level of this signal is determined by the Monitor Level control. 7 30. LEFT/MONO OUTPUT: This 1/4" jack provides an output from the Left Main mix to supply external amp/speaker combinations. When no plug is connected to the Right Output (#31) then the right signal is mixed with the left, and both can be accessed at the Left/Mono Output. This works well when you use the internal amps for monitor and external amps for Main. Only one patch cord is required to get the Main out to the external amp. RIGHT OUTPUT: This 1/4" jack provides an output from the Right Main mix to supply external amp/speaker combinations. POWER AMP INPUTS: Plugging into these jacks allows the user to go directly into the Graphic Equalizer, then into its respective power amplifier channel. POWER LED: The power on LED indicator will light when the unit is powered. A/C POWER INLET: This is the receptacle for an IEC line cord, which provides AC power to the mixer/amplifier. Damage to the equipment may result if improper line voltage is used (see line voltage marking on unit). [. . . ] Features and specifications subject to change without notice. 34 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed. All safety and operating instructions should be retained for future reference. Obey all cautions in the operating instructions and on the back of the unit. This product should not be used near water, i. e. , a bathtub, sink, swimming pool, wet basement, etc. [. . . ]