User manual PEAVEY WK8 INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PEAVEY WK8. We hope that this PEAVEY WK8 user guide will be useful to you.
You may also download the following manuals related to this product:
PEAVEY WK8 ANNEXE 289 INSTALLATION (1416 ko)
PEAVEY WK8 ANNEXE 464 INSTALLATION (1416 ko)
Manual abstract: user guide PEAVEY WK8INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] CAUTION Read these notes before proceeding These servicing instructions are for use by qualified personnel only. [. . . ] carefully turn the instrument over and unscrew the screws marked by the arrows. Hold the chassis (top & Bottom) tightly and turn the instrument the right way up, lift off the top chassis as shown in the figure with care without forcing or disconnecting the cables. - To install the kit into EQUINOX, SK760 or SK880 keyboards, follow the instructions on page 9-10. - To install the kit into WK6 or WK8 keyboards follow the instructions on page 7-8. Model/Modello ENGLISH - Anchor the SCSI board (A) to the support (B) using the screws (D) and washers (E) as show on fig. - Locate the SCSI slot cover and remove it by unscrewing the 3 screws that fix it to the chassis. [. . . ] - Connect the flat cable (G) to CN16 connector on CPU - Collegare il cavo piatto (G) al connettore CN16 board and the other end to CN1 on SCSI board as sulla scheda CPU e l'altro capo al connettore CN1 sulla scheda SCSI come da figura 5. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY WK8
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY WK8 will begin.
