User manual PEAVEY WK4 INSTALLATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PEAVEY WK4. We hope that this PEAVEY WK4 user guide will be useful to you.


PEAVEY WK4 INSTALLATION: Download the complete user guide (1349 Ko)

You may also download the following manuals related to this product:

   PEAVEY WK4 ANNEXE 401 INSTALLATION (1416 ko)
   PEAVEY WK4 ANNEXE 117 INSTALLATION (1416 ko)

Manual abstract: user guide PEAVEY WK4INSTALLATION

Detailed instructions for use are in the User's Guide.

[. . . ] CAUTION Read these notes before proceeding These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock and device malfunction, do not perform any user-servicing but refer all servicing to the nearest Service Center Authorized by GENERALMUSIC. [. . . ] This page is intentionally left blank - Locate the CPU board [A] and remove the support [B] by unscrewing the locking screws [7]. - Fix the mounting brakets [3] to the Hard Disk [6] by means of the four screw [4] and the four washers [5], fix the assembly to the threaded locations [E] by means of the four screws [4] and the four washers [5]. - Connect one end of the jumper [2] to the Hard Disk connector, starting from the extreme left end in order that 4 free pins remain to the right of the connector, and the other end to the CPU's CN8 connector [D]. NOTE: The optional Generalmusic Hard Disk is not supplied with this kit. Hard Disks are avalaible from special outlets with the same technical characteristics as the optional Generalmusic hard disk. If you mount the optional Generalmusic hard disk DO NOT FORMAT THE DEVICE, because it is supplied already formatted and filled with various styles, samples and songs. - Locate the CPU board [A] and remove the support [B] by unscrewing the locking screws [7]. - Fix the mounting brakets [3] to the Hard Disk [6] by means of the four screw [4] and the four washers [5], fix the assembly to the threaded locations [E] by means of the four screws [4] and the four washers [5]. - Connect one end of the jumper [2] to the Hard Disk connector, starting from the extreme left end in order that 4 free pins remain to the right of the connector, and the other end to the CPU's CN8 connector [D]. NOTE: The optional Generalmusic Hard Disk is not supplied with this kit. Hard Disks are avalaible from special outlets with the same technical characteristics as the optional Generalmusic hard disk. If you mount the optional Generalmusic hard disk DO NOT FORMAT THE DEVICE, because it is supplied already formatted and filled with various styles, samples and songs. [. . . ] Connect the HD (B) to CN8 to the CPU board (I) by means cable (H) as show in figure. IMPORTANT: if the hard disk is not supplied by Generalmisic, you may FORMAT it following the instructions enclosed in the owner's manual. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY WK4




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY WK4 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.