User manual PEAVEY VOCAL PROCESSOR KIT INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PEAVEY VOCAL PROCESSOR KIT. We hope that this PEAVEY VOCAL PROCESSOR KIT user guide will be useful to you.
 |
PEAVEY VOCAL PROCESSOR KIT INSTALLATION: Download the complete user guide (2812 Ko) |
Manual abstract: user guide PEAVEY VOCAL PROCESSOR KITINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] CAUTION Read these notes before proceeding These servicing instructions are for use by qualified personnel only. [. . . ] Hold the chassis (top & Bottom) tightly and turn the instrument the right way up, lift off the top chassis as shown in the figure with care without forcing or disconnecting the cables. These operations are valid for the 1st version keyboards, recognized by the codes shown on the label on the back panel of the instrument, only the following codes are valid: 995155 - 995156 - 995157 -995158 are valid. - Fix the Vocal Processor Board [1] by means of the screw [7] to the support [B]. NOTE: The jumper J1 [F] must be set on A position if the buffer modules are installed, on B position if the SIMM dram modules are intalled. [. . . ] NOTE: The jumper J1 [F] must be set on A position if the buffer modules are installed, on B position if the SIMM dram modules are intalled. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY VOCAL PROCESSOR KIT
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY VOCAL PROCESSOR KIT will begin.