User manual PEAVEY UNITY 2000

[. . . ] Lift the operator panel, open the front cover and remove the shipping tape. For each drum, remove the tape and the protective sheets. ES3640e MFP 16. jpg ES36 40e MFP 20. jp g ES3640e MFP 17. jpg 5. Remove the colored image drum packing pieces. ES3640e MFP 21. jpg 7. Remove locks and seals for each drum. ES3640e MFP 22. jpg ES3640e MFP 19. jpg 8 8. [. . . ] Shake the toner cartridge from side to side to distribute toner. c. Remove sealing tape and insert the cartridge into the corresponding color drum in the printer. ES3640e MFP 26. jpg 9. Remove the backing from the strip on the back of the Handy Reference Guide and apply the guide to the printer. ES3640e MFP 24. jpg ES3640e MFP 15b. jpg HandyRef_Co ver. jpg ES3640e MFP 25. jpg 9 Step 3 Assemble the Stand. Accessories in the Stand Box ES3640e MFP 99. jpg 8 Leg Bolts with Lock Washers and Flat Washers for Stand Legs 2 Screws with Lock Washers and Flat Washers for Bottom of Printer Brackets 2 Screws with Lock Washers and Flat Washers for Plate Lock Mechanism 2 Screws with Lock Washers and Flat Washers for attaching the Printer to the Bumper Brackets 4 Small Screws with Lock Washers and Flat Washers for Top of Printer Brackets 16 Medium Screws with Lock Washers and Flat Washers 2 Cable Clips for attaching DCD cable (see "Accessories in Scanner Box""Accessories in Scanner Box" on page 15) to the stand. 2 Bumper Brackets 3 Tie Wraps (to secure cabling) 2 Printer Brackets ES3640e MFP 13a. jpg 10 1. Unpack the stand, removing any shipping tape/ materials. ES3640e MFP 89a. jpg Stand Components: ES3640e MFP 36a. jpg The stand includes cylinders for moving the scanner shelf up and down. NEVER ATTEMPT TO RAISE OR LOWER THE SHELF WITHOUT THE SCANNER BOLTED TO IT. Without the weight of the scanner on it, the shelf could rise rapidly when released, potentially causing severe injury. ES3640e MFP 33a. jpg ES3640e MFP 86. jpg ES3640e MFP TO PREVENT ANY POSSIBLE CRUSHING OF FINGERS, KEEP YOUR HANDS AWAY FROM THE POSTS AT THE BACK OF THE SCANNER STAND WHEN MOVING THE SCANNER SHELF DOWN. · Scanner Support Shelf (1) · Stand Frame with Posts (2) · Two Legs with Casters (3) ES3640e MFP 90a. jpg ES3640e MFP 85c. jpg 11 2. Attach the legs with casters to either end of the frame, using the eight leg bolts. 5. Place the scanner shelf on the frame and secure it in place using four of the medium screws. ES3640e MFP 89a. jpg NEVER ATTEMPT TO RAISE OR LOWER THE SHELF WITHOUT THE SCANNER BOLTED TO IT. ES3640e MFP 92. jpg 3. Place the foam bumpers in the brackets and attach the two brackets to the stand using the medium screws (two per bracket). ES3640e MFP 86. jpg Important! Do not lower the shelf until you have placed and secured the scanner on the shelf. ES3640e MFP 34. jpg 4. Connect the scanner power cable (see "Accessories in Printer Box" on page 5) to the 17 scanner power supply. Secure the DCD cable to the top back of the shelf using one of the cable clips and one of the medium screws ("Accessories in Scanner Box" on page 15). ES3640e MFP 57a. jpg ES3640e MFP 107 crop. jpg ES3640e MFP 48. jpg 6. Uncoil the DCD cable and mount the ferrite cores (1) on either end of the USB data cable, next to the ferrite cores built into the cable (cable and ferrite cores are supplied in the scanner box: see page 15), then attach the DCD cable lines to the back of the scanner. Use the tie wraps to attach the scanner power supply cable to the DCD cable in two places. ES3640e MFP 49. jpg ES3640e MFP 102. jpg 18 Step 6 Attach the Printer to the Stand 1. Remove the two screws shown in the illustration from the back of the printer. Fire Hazard Warning Icon. jpg Be sure to use the 15A AC power cord supplied with the printer. Use of a power cord NOT supplied with this printer, or an extension cord, may result in overheating, and could be a safety hazard. 2. Connect the printer power cord (supplied in the printer box) to the printer. ES3640e MFP 29. jpg ES3640 e MFP 30a. jpg b. Use two small screws at the top and one long screw at the bottom of each bracket (see "Accessories in the Stand Box" on page 10). Important!! ES3640e MFP 30 crop. jpg Do not connect this product to an uninterruptible power supply (UPS). For further information please contact Oki Data at 1-800-PEAVEYDATA . 19 3. Connect the DCD cable lines to the printer. ES3640e MFP 59a. jpg 4. Connect the printer power cord to the power strip. ES3640e MFP 55. jpg ES3640e MFP 58a. jpg 5. [. . . ] Connect the printer power cord to the power strip. ES3640e MFP 55. jpg ES3640e MFP 58a. jpg 5. Use the thumbscrews to attach the printer to the bumper brackets on either side of the stand. 7. Secure the lower end of the DCD cable to the left side of the stand (above the power strip) using one of the cable clips and one of the medium screws. ES3640e MFP 53. jpg ES364 0e MFP 106a. j pg 20 Step 7 Finish the Installation TO PREVENT ANY POSSIBLE CRUSHING OF FINGERS, KEEP YOUR HANDS AWAY FROM THE POSTS AT THE BACK OF THE SCANNER STAND WHEN MOVING THE SCANNER SHELF DOWN. ES3640e MFP 90a. jpg ES3640e MFP 85b. jpg Step 8 Connect to the Network NOTES The Ethernet cable is not supplied with the system. In addition to the Ethernet port, the printer also has a USB and a parallel port. [. . . ]