User manual PEAVEY STUDIO PRO 60

[. . . ] Push the levers back up to lock them. 9 Push the CSF paper lever back to the RESET position (1) and place a stack of paper in the feed bin (2). The CSF holds up to 100 sheets of 20-lb paper. 10 Pull the CSF paper lever forward to the SET position (1), then close the access cover (2), leaving the carriage cover (3) open. 11 Turn on the printer (the printhead travels back and forth, and the SEL and POWER lights come on) and set the Top of Form (see the back of this sheet). Oki Data Americas, Inc. , 2000 Bishops Gate Blvd. , Mt. Laurel, NJ 08054-4620 TEL: (856) 235-2600 FAX: (856) 778-4184 www. okidata. com © 1992, 2001 by Okidata 58087102 Using the Cut Sheet Feeder (CSF) SEL SEL FF/LOAD Micro Feed Up Limited Warranty: U. S. [. . . ] Laurel, NJ 08054-4620 TEL: (856) 235-2600 FAX: (856) 778-4184 www. okidata. com © 1992, 2001 by Okidata 58087102 Using the Cut Sheet Feeder (CSF) SEL SEL FF/LOAD Micro Feed Up Limited Warranty: U. S. and Canada Inserting/Ejecting Paper With the CSF installed and selected, when your printer receives the command to print, it will automatically load in a sheet from the CSF and start printing. When files are several pages long, the printer will eject each printed page into the stacker, insert a new sheet and continue printing. Forms Tear-Off Set to ON LF TEAR TOF PARK QUIET MENU SHIFT Micro Feed Down First: Check/Set the Tear Position EXIT GROUP ALARM MENU ITEM PRINT POWER SET 1 Turn the printer on and press PARK to remove the paper from the path. To change the tear-off position: press and hold SHIFT, then press LF/Micro Feed Up to move the tear-off position down or FF/LOAD/Micro Feed Down to move the tear-off position up. CSF Insert Command Setting Top of Form (TOF) 2 3 Note: The first line of printing is indicated by the red line (1) on the printhead's plastic shield. Manual Load/Eject Paper To load or eject a sheet of paper manually, press the FF/LOAD button. 4 Load/Eject Paper Commands If you are writing your own program, you must include the appropriate commands: 5 1 6 Forms Tear-Off Set to OFF 1 Turn the printer ON. 3 Press and hold SHIFT, then press LF/Micro Feed Up to move the TOF location down on the page or FF/ LOAD/Micro Feed Down to move the TOF location up. 4 Keep holding SHIFT and press QUIET/TOF a few times to engage the new setting. 1 2 3 4 Epson/IBM ESC EM I 27 25 73 MICROLINE Standard ESC S 27 83 1B 19 49 1B53 Inserts and positions new page. and Canada, English only) or at 1-856-222-5276 (Spanish only), or by contacting one of the service locations listed below. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For the most up-to-date listing of Oki Data authorized Service Centers, call 1-800-PEAVEY-DATA (1-800-654-3282). 5 Press SHIFT and TEAR. Continue holding SHIFT, then press LF/Micro Feed Up to move the TOF location down on the page or FF/LOAD/Micro Feed Down to move the TOF location up. Keep holding the SHIFT button and press the QUIET/TOF button a few times to engage the new setting. Press SELECT to place the printer back on line. Epson/IBM Emulation ESC EM R 27 25 82 1B 19 52 MICROLINE Standard Emulation ESC V 27 86 1B 56 Ejects and stacks page; no new page is inserted. Lind Feed Command (All Emulations) Oki Data Service Centers LF 10 0A When page is at the bottom margin, this command ejects it, then inserts a new sheet; otherwise, it performs a normal line feed. Form Feed Command (All Emulations) UNITED STATES Oki Data Americas, Inc. Laurel, NJ 08054 Canada L4W 4M8 Tel: 1-800-654-3282 Fax: 1-856-222-5247 CANADA Oki Data Americas, Inc. [. . . ] Keep holding the SHIFT button and press the QUIET/TOF button a few times to engage the new setting. Press SELECT to place the printer back on line. Epson/IBM Emulation ESC EM R 27 25 82 1B 19 52 MICROLINE Standard Emulation ESC V 27 86 1B 56 Ejects and stacks page; no new page is inserted. Lind Feed Command (All Emulations) Oki Data Service Centers LF 10 0A When page is at the bottom margin, this command ejects it, then inserts a new sheet; otherwise, it performs a normal line feed. Form Feed Command (All Emulations) UNITED STATES Oki Data Americas, Inc. Laurel, NJ 08054 Canada L4W 4M8 Tel: 1-800-654-3282 Fax: 1-856-222-5247 CANADA Oki Data Americas, Inc. [. . . ]