User manual PEAVEY SP 2X DATASHEET

[. . . ] (38. 6 kg) Features: · Two-way, full range/biampable PA enclosure · Sound Guard HF driver protection circuit · Rx22TM driver with a 2" titanium diaphragm coupled to a CH® 941 90° X 40° constant-directivity horn · 15" BWX Black Widow® with Kevlar® cone and field-replaceable basket · SPTM X series trapezoidal cabinet and styling with integral stand adapter · External voicing switch · Neutrik® biamp jack frequency driver from unforeseen accidents. A voicing switch on the input cup allows for the selection of two different response settings for the loudspeaker system. [. . . ] Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent Amplitude Response (1W 1m On-Axis) 110 dB SPL (re 20 Pa) 100 90 80 70 60 20 Switch Position Normal EQ 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Description The SP 2X is both a cosmetic and performance redesign of the SP 2G loudspeaker system. This high power handling two-way loudspeaker system is comprised of a 15" BWX woofer with a Kevlar impregnated cone and an Rx22 compression driver coupled to a CH 941 constant directivity horn. This unit can be driven in full-range mode simply by plugging into one of the two 1/4" phone jacks on the input plate. A Neutrik Speakon connector is provided as an input for biamp operation. The trapezoidal design of the enclosure allows arrays to be constructed much more easily than it would be using a rectangular shaped box. This shape also greatly reduces the buildup of standing waves on the inside of the enclosure. This ensures a minimum of mid-bass and mid-range coloration of the reproduced sound due to the cabinet. The SP 2X is constructed of 3/4" OSB and covered with Peavey's durable black carpet. [. . . ] Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. Mounting Warning: This unit is not designed for overhead suspension. [. . . ]