User manual PEAVEY PENTA

[. . . ] When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Standby (10) This switch is used to allow the tubes to warm up before the amplifier is activated. It is advisable to allow for three minutes of tube warm-up time before engaging the Standby switch. This 1/4" mono jack is provided for use with a single-button footswitch. This creates the capability to switch from the PentatoneTM setting on the front to the setting on the back. Without the footswitch, only the front Pentatone setting will function. Pentatone (13) This switch allows the user to select one of the five standard settings in conjunction with the footswitch. speaker Outputs (14) These 1/4" mono jacks provide two connections for speaker cabinets. Impedance Selector (15) This switch must be set properly depending upon the speaker cabinet used. If two 16 ohm cabinets are being used the switch should be set to 8 ohm. Ground (16) This three-position switch is used when you have a hum problem. Try using this switch to eliminate hum problems that are related to the AC mains or AC line grounding. Line Cord (120 V units only) (17) For your safety, we have incorporated a three-wire line (mains) cable with proper grounding facilities. If it is necessary to use the PentaTM without proper grounding facilities, suitable grounding adapters should be used. Greatly reduced shock hazard exists when the unit is operated with the proper grounded receptacles. fuse (18) A 6A/250 amp fuse is located within the cap of the fuseholder. It must be replaced with the same type and value in order to avoid damage to the equipment and to prevent voiding the warranty. If the amp repeatedly blows fuses, it should be taken to a qualified service center for repair. WARNING: The fuse should only be replaced when the power cord has been disconnected from its power source. [. . . ] If the repairs are covered by warranty, Peavey will pay the return shipping charges. How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of warranty coverage. [. . . ]