User manual PEAVEY M-2600

[. . . ] The HF section employs a 1. 6 exit/100 mm voice coil compression driver mounted on one of Peavey's revolutionary new Quadratic Throat waveguides. The ILS 1264 has a full range sensitivity of 96 dB SPL ­ (1 Watt/1 meter) and a maximum output of 130 dB at 1 meter (full range). The Peavey ILS 1264 is a high performance loudspeaker system for use in demanding sound reinforcement applications. [. . . ] The robust construction of the ILS 1264 provides power handling capacities of 700 W continuous, 1. 4 kW program and 2. 8 kW peak (full range). The unit may be operated using the internal passive crossover or may be biamplified. Twelve 3/8" x 16 threaded mounting suspension points (2 each top, bottom and back and 3 each sides) allow a variety of suspension configurations. Multiple units may be mounted to form a vertical/horizontal array [see limitations under mounting instructions]. Both versions of the ILS 1264 are solidly constructed of 3/4" void-free poplar plywood and finished with an exterior grade hardened black paint. Harmonic Distortion : 1% Rated Power 110 100 dB SPL (re 20 Pa) 90 80 70 60 50 40 20 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Figure 6 3 2nd Harmonic 3rd Harmonic Frequency Response This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the M-2600 is measured at a distance of 1-meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure 1, the selected drivers in the M-2600 combine to give a smooth frequency response from 63 Hz - 18. 5 kHz. today's high technology music. The blending of the components of the M-2600 exhibit a desirable beamwidth and directivity (figure 3 and 4) suitable for sound reinforcement applications. Mounting Caution: Before attempting to suspend this speaker, consult a certified structural engineer. Speaker can fall from improper suspension, resulting in serious injury and property damage. However, the combined weight of additional enclosures and all cables, clamps and other hardware must not exceed 320 pounds. The M-2600 weighs 80 pounds and the maximum combined weight suspended from the uppermost mounting bracket assemblies must not exceed 400 pounds. All associated rigging is the responsibility of others. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. Power Handling There are many different approaches to power handling ratings. [. . . ] Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. Power Handling There are many different approaches to power handling ratings. Peavey rates this loudspeaker system's power handling using a fullrange form of the AES Standard 2-1984. [. . . ]