User manual PEAVEY KB3

[. . . ] B) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. C) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. Connect left output of your keyboard to the left input of the KB2/KB3 and connect right output of your keyboard to the right input of the KB2/KB3 5. C a u t i o n : Excessive low frequency boost causes greater power consumption and increases the possibility of speaker damage. Controls high-impedance microphones or other high-level sources equipped with a 1/4" phone plug. To avoid damage to your hearing, make sure to turn the dial fully counter-clockwise before using headphones. Slowly turn the knob clockwise until a comfortable listening level is set. Make sure the Master level is completely down (full counterclockwise) before powering up the unit. This two-way rocker switch applies power to the unit when placed in the ON position. This low-noise, electronically-balanced XLR connector can be used to route signals to a mixing console, recording device, etc. This pair of 1/4" jacks allow the use of various auxiliary units (effects units, equalizers, etc. Use this 1/4" jack to connect to the output of any line-level device. For use with low-impedance microphones or other line-level sources equipped with a male XLR connector. These 1/4" jacks accept high-impedance microphones or line-level sources equipped with 1/4" phone plugs. an AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. [. . . ] If the product or component must be shipped to Peavey for warranty service, the consumer must pay initial shipping charges. If the repairs are covered by warranty, Peavey will pay the return shipping charges. How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. [. . . ]