User manual PEAVEY KB-A 300

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. " Connect only to a power supply of the type marked on the unit adjacent to the power supply cord. If this product is to be mounted in an equipment rack, rear support should be provided. [. . . ] To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation. Once again, Peavey engineers have listened to input from keyboard players and put together an amplifier that combines excellent features and sound in one portable package. The new KB Series amplifiers deliver awesome sound reproduction for all of your keyboard sounds--from thundering bass to crystal highs--it's all there!Before you begin to play through your amp, it is very important to ensure the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. in addition , an external speaker jack is provided for the additional use of an external speaker enclosure. This feature is located on the rear panel as well and is also explained in this section. Refer to the front and rear panel diagrams in this manual to locate the particular features next to their number. Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. Ultra-strength, retractable, locking handle for easy transport--just lock it, lean it back and go!Connect left output of your keyboard to the left input of the KB5/KB-A 300 and connect right output of your keyboard to the right input of the KB5/KB-A 300 5. This pair of 1/4" jacks allows the use of various auxiliary units (effects units, equalizers, etc. This pair of 1/4" jacks accepts high-impedance microphones or line-level sources equipped with left and right 1/4" phone plugs. an AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. The mains cord should be connected to the amplifier before connecting to a suitable AC outlet. The mains cord supplied with the unit is heavy-duty, 3-conductor type with a conventional 120 VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be properly grounded. The following preamp specs are measured @ 1 kHz, nominal signal levels are with channel level controls set at 5, minimum levels are with channel level controls set at 10. 200 Watts RMS/4 Ohms or 150 Watts RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Greater than 100 dB below rated power The following preamp specs are measured @ 1 kHz, nominal signal levels are with channel level controls set at 5, minimum levels are with channel level controls set at 10. 100 Watts RMS/4 Ohms or 75 W RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Greater than 100 dB below rated power The following preamp specs are measured @ 1 kHz, nominal signal levels are with channel level controls set at 5, minimum levels are with channel level controls set at 10. 200 Watts RMS/4 Ohms or 150 Watts RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Greater than 100 dB below rated power The following preamp specs are measured @ 1 kHz, nominal signal levels are with channel level controls set at 5, minimum levels are with channel level controls set at 10. 100 Watts RMS/4 Ohms or 75 W RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Greater than 100 dB below rated power The following preamp specs are measured @ 1 kHz, nominal signal levels are with channel level controls set at 5, minimum levels are with channel level controls set at 10. [. . . ] 200 Watts RMS/4 Ohms or 150 Watts RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Greater than 100 dB below rated power The following preamp specs are measured @ 1 kHz, nominal signal levels are with channel level controls set at 5, minimum levels are with channel level controls set at 10. 100 Watts RMS/4 Ohms or 75 W RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Greater than 100 dB below rated power What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original retail purchaser of the product. 2 years *(+ 3 years) 2 years *(+ 1 year) 3 years *(+ 2 years) 1 year *(+ 1 year) 2 years 1 year 90 days [*Denotes additional warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days of purchase. [. . . ]