User manual PEAVEY KB 60

[. . . ] Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug, proceed as follows: a) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or colored green and yellow. B) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. C) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus. [. . . ] To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation. Lors de l'utilsation sur pied ou pole de support, assurez dans le cas de déplacement de l'ensemble enceinte/ support de prévenir tout basculement intempestif de celui-ci. As the successor to the awardwinning Kosmos®, it incorporates improved circuitry and adds features to provide even more functionality for live sound and recording applications. Like the original Kosmos®, it can provide planet rattling bass as its subharmonic processor watches the source material, analyzes the bass, then generates additional phase-synced low frequencies an octave below it. Borrowing from the Kosmos® Pro, the damping (tracking) has two preset ranges. When using the Kosmos® v2, it is recommended that other equalization (especially output equalization) be set flat. Adjust the Kosmos® v2 to optimize the tone quality, then make any fine adjustments with the other gear. You may find that little needs to be tweaked, since the Kosmos® v2 corrects deficiencies in the speaker system. Bass boost applied before the Kosmos® v2 may defeat what you are trying to accomplish by causing the sound to be muddy or distorted. Dynamic source tracking yields tight, clean bass sounds · subharmonic activity indicator shows processing status · A specially tuned low frequency circuit, compliments the subharmonics and can be used to fatten the low end · Internal 90 Hz crossover signal can be removed from the subwoofer output when used as a side-chain effect · Master output level controls left, right, and subwoofer output levels simultaneously · Please read this guide carefully to ensure your personal safety as well as the safety of your equipment Connecting your Kosmos® II in your signal chain: Direct: Insert Kosmos® v2 between the output of the mixer and the input of the power amp As An Effect: Create an effects loop between your mixer and Kosmos® v2 by connecting an Aux send from your mixer into the Kosmos® v2, and return the signal to your mixer through an aux return or channel strip input. The status is indicated by a red lamp, which lights when the unit is off-line. ) US DOMESTIC AC MAINS CORD: The mains cord supplied with the unit is a heavy-duty, 3-conductor type with a conventional 120 VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable grounding adapter should be used, and the third wire should be grounded properly. NOTE FOR UK ONLY: If the colors of the wires in the mains lead of this unit do not correspond with the colored markings identifying terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must be connected to the terminal marked by the letter E, or by the earth symbol, or colored green or green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N, or colored black. (3) The wire that is colored brown must be connected to the terminal that is marked with the letter L or colored red. Subwoofer Output This 1/4" TRS electronically balanced output can be used in either balanced (with a 1/4" TRS jack) or unbalanced (standard 1/4" jack) mode. Left and Right Outputs The left and right outputs are electronically balanced, with pin 2 (and tip) positive. the XLR and 1/4" TRS phono jacks are directly wired in parallel. They should not be used on the same channel at the same time since the output balance would not necessarily be maintained, especially if a balanced and an unbalanced connector were used. Inputs The left and right input jacks are balanced with pin 2 (and tip) positive. As mentioned above, do not use both the XLR and the 1/4" inputs on the same channel at the same time or an imbalance could occur, compromising the unit's hum and noise rejection. [. . . ] What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original retail purchaser of the product. 2 years (+ 3 years)* 2 years (+ 1 year)* 3 years (+ 2 years)* 1 year (+ 1 year)* 2 years 1 year 90 days [*Denotes additional warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days of purchase. What Peavey Will Do We will repair or replace (at Peavey's discretion) products covered by warranty at no charge for labor or materials. [. . . ]