User manual PEAVEY HISYS 115XT

[. . . ] Full Range operation Thank you for choosing PeaveyÕs HiSys 112, 115 or 118XT low frequency speaker enclosure as part of your sound reinforcement system. [. . . ] For use with PeaveyÕs CS Series power amplifiers with crossover islands, we recommend either a PL-150 or a PL-250. For use with other electronic crossovers and configurations, consult your Authorised Peavey Dealer. hi output We have equipped the HiSys 112 , 115 and the 118XT with a high pass output socket. This provides a filtered output signal for operating a satellite enclosure with a minimum impedance of 4 ohms. enclosures such as the HiSys 1XT , 2XT ( in 4 or 8 ohms} or the Hisys 6XT are recommended. The design of the crossover ensures the total load presented to the power amplifier is never less than a nominal 4ohms. NOTE: that there is no hi output available whilst the HiSys 112, 115 and 118XT are in bi-amp mode. Operation The full range signal from the power amplifier is connected to the input of the HiSys 112, 115, and 118XT. [. . . ] Due to our policy of continuing development, features and specifications are subject to change without notice. [. . . ]