User manual PEAVEY FH 1 DATASHEET

[. . . ] Placing this switch in the "off" position defeats this automatic facility. Use the SET AUTO controls as follows: HOLD: DEPTH: SENS: Adjusts length of time music is attenuated when auto voice-over is active. Adjusts level that music is attenuated when auto voice-over is active. (Sensitivity Control) Adjusts level of mic signal needed to activate auto voice-over circuitry. Manual Voice-Over Button (9): When pressed, this drops the music level enabling the DJ to talk over the music. [. . . ] For example: Left-hand ASSIGN switch set to channel #3 will access channel 3 when the crossfade slider is in the left-hand position. Right-hand ASSIGN switch set to channel #2 will access channel 2 when the crossfade slider is in the right-hand position. NOTE: It is useful to remember that when the crossfade slider is set to its center (number 5) position, both channels assigned to the left- and right-hand crossfade positions will be at equal levels. You may then simply use the channel level controls to crossfade between the two assigned channels and ignore the crossfade, leaving it set in the center position. This is a more "European" technique of crossfading and is preferred by some DJs. REAR PANEL: Power Input (35): External 39 V AC 1 amp power supply should be plugged in at this point. Plug the small jack at the end of the power supply lead into the 39 V AC socket on the rear of the unit. Plug the power supply provided with your PM 1000 into a main AC wall power receptacle. Turn unit power switch on (number 23) to activate unit. CAUTION: Use only the power supply that is provided with this product. If the original power supply must be replaced, consult your dealer or the factory for assistance in obtaining the correct replacement. Failure to use the correct power supply could result in fire or shock hazard, extensive circuit damage, decreased performance, or non-operation. Monitor Outputs (36): Monitor output left and right jacks are provided for monitoring main Left and Right signals. The output at this point should be patched to the stereo power amplifiers driving the monitor speaker system. NOTE: It is often useful to use the monitor outputs to drive an independent sound system for another audio zone such as a second dance floor or background music elsewhere within the venue. Program Outputs (37): Main output left and right jacks are provided for the main (program) output. The output at this point should be patched to the stereo power amplifiers driving the main speaker system. Peavey's liability to the purchaser for damages from any cause whatsoever and regardless of the form of action, including negligence, is limited to the actual damages up to the greater of $500. 00 or an amount equal to the purchase price of the product that caused the damage or that is the subject of or IS directly related to the cause of action. Such purchase price will be that In effect for the specific product when the cause of action arose. This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey's negligence. Peavey does not assume liability for personal injury or property damage arising out of or caused by a non-Peavey alteration or attachment, nor does Peavey assume any responsbility for damage to interconnected non-Peavey equipment that may result from the normal functioning and maintenance of the Peavey equipment. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, ANY INCIDENTAL DAMAGES, OR ANY CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITED WARRANTIES ARE IN LIEU OF ANY AND ALL WARRANTIES EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE; PROVIDED, HOWEVER, THAT IF THE OTHER TERMS AND CONDITIONS NECESSARY TO THE EXISTENCE OF THE EXPRESSED, LIMITED WARRANTIES, AS HEREINABOVE STATED, HAVE BEEN COMPLIED WITH, IMPLIED WARRANTIES ARE NOT DISCLAIMED DURING THE APPLICABLE ONE-YEAR OR NINETY-DAY PERIOD FROM DATE OF PURCHASE OF THIS PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THESE LIMITED WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. THESE LIMITED WARRANTIES ARE THE ONLY EXPRESSED WARRANTIES ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY. In the event of any modification or disclaimer of expressed or implied warranties, or any limitation of remedies, contained herein conflicts with applicable law, then such modification, disclaimer or limitation, as the case may be, shall be deemed to be modified to the extent necessary to comply with such law. Your remedies for breach of these warranties are limited to those remedies provided herein and Peavey Electronics Corporation gives this limited warranty only with respect to equipment purchased in the United States of America. [. . . ] For more information on grounding, write for our free booklet "Shock 9. Periodically check cords for cuts or signs of stress, especially at the plug and the point where the cord exits the unit. The power supply cord should be unplugged when the unit is to be unused for long periods of time. If this product is to be mounted in an equipment rack, rear support should be provided. [. . . ]