User manual PEAVEY FEEDBACK FERRET D

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as when power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. " Connect only to a power supply of the type marked on the unit adjacent to the power supply cord. If this product is to be mounted in an equipment rack, rear support should be provided. [. . . ] Setup/Preset This switch toggles the next bank of buttons between SETUP mode and PRESET mode. preset Mode (LED on) The four buttons labeled 1-4 are used to store and recall Feedback Ferret D settings. To store, press and hold the desired preset button until the LED stops blinking. Note: using the power up recall switch on the rear panel, the Feedback Ferret D can be set to recall preset 1 automatically each time the power is turned on. Setup Mode (LED off ) In this mode the four function buttons each take on a separate function as indicated on the front panel. Normal/Filter Learn FILTER LEARN mode is used to preempt feedback by setting fixed filters before the performance starts. Pressing the button will turn the LED on to indicate you are no longer in NORMAL operation mode. To take advantage of this mode, see "Operating Instructions" later in the manual. In stereo mode, the Feedback Ferret D reacts to feedback in both the left and right channels by configuring stereo filters. In dual mono mode, each channel of the Feedback Ferret D acts independently to seek out and eliminate feedback. In dual mono mode the left and right channel selector buttons are used to switch the display and function buttons between channels. Mono View Left and Mono View Right These buttons are used to switch the front panel buttons and display between channels in the dual mono mode. Lock Stops the Feedback Ferret D from setting any new filters but keeps the filters already defined in place. Once these static filters are defined, they lock and maintain their status until they are reset. The dynamic filters (9­16) are those filters that change as input changes (i. Power (On) This LED illuminates when AC power is supplied and the power switch is on. The mains cord should be connected to the unit before plugging into a suitable AC outlet. Fuse Domestic: 1 Amp Slow-Blow Export: 500 mA Time Delay Power Switch This switch supplies AC mains power to the internal power supply. When the unit is functioning, the Power LED on the front panel will illuminate. Front Panel Disable Switch When the Disable switch is engaged, all buttons on the front of the unit are disabled. Use this switch to prevent accidental changes to your settings once you've set up your system. Power-Up Recall This button determines, upon powering up, whether the unit recalls the last settings used or preset 1. [. . . ] If the product or component must be shipped to Peavey for warranty service, the consumer must pay initial shipping charges. If the repairs are covered by warranty, Peavey will pay the return shipping charges. How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of warranty coverage. [. . . ]