User manual PEAVEY DUEL 212

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PEAVEY DUEL 212. We hope that this PEAVEY DUEL 212 user guide will be useful to you.


PEAVEY DUEL 212 : Download the complete user guide (1493 Ko)

Manual abstract: user guide PEAVEY DUEL 212

Detailed instructions for use are in the User's Guide.

[. . . ] Passive custom tone controls that regulate the low, mid, and high frequencies, respectively, of the lead channel only. The speed control determines the rate with which the signal is modulated. This control varies the speed of the tremolo master oscillator and should provide any speed desired for modern music. [. . . ] Footswitch is used to select the channel from clean to lead and to select the effect, reverb, and tremolo on or off. If the send level is too low for a particular effects device, turn the control clockwise; if too high, counterclockwise. NOTE: Signals are supplied to outboard effects or signal processing units by patching from the effects send jack (6) output into the outboard unit(s) and back into the effects return (7) input using shielded cable with l/4" phone plugs. Remote (on/off) selection of outboard effects devices can be achieved using the footswitch. The preamp out jack can be used to route the amplified signal to a mixing console, tape recorder, etc. connect the preamp output using a shielded cable to an input of the tape recorder , mixer , etc. If two enclosures of equal impedance are used, the switch should be set at one-half of that value (e. , two 16 ohm enclosures: set switch to 8 ohms; two 8 ohm enclosures: set switch to 4 ohms). When using only the internal speakers, the Impedance Selector Switch should be set to 16 ohm. When using more than one enclosure, be sure to calculate the total impedance and set the impedance switch (9) accordingly. The following specs are measured @ 1 kHz with presence and resonance at 0 and effects level at 10. Typically @ 5% THD, 1 kHz, 120 V AC line 120 W RMS into 16, 8, or 4 ohms +O, -3 dB, 50 Hz to 20 kHz @ 100 W RMS into 8 ohms Impedance: High Z, 44 kilo-ohms All levels are increased by +6 dB Greater than 85 dB below rated power Load Impedance: 47 kilo-ohms or greater Output Level: -10 dBV - +10 dBV, 300 mV - 3 V RMS The following specs are measured @ 1 kHz with the controls preset as follows: Low & High EQ @ 10 MidEQ @ 0 Bright Out Boost Out Shift Out Lead Posts @ 10 Presence & Resonance @ 0 Master Level @ 10 Effects Level @ 10 Reverb @ 0 Tremolo/Speed & Intensity @ 0 Nominal levels with pre gains @ 5 Minimum levels with pre gains @ 10 Special 4 button unit with LED indicators, Channel Select, Effects Loop Bypass, Reverb & Tremolo Bypass 20 Hz to 20 kHz unweighted Greater than 75 dB below rated power Tone settings are general and will vary according to type of guitar, type and gauges of strings, type of pickup and even type of pick. Personal taste, playing style, and type of music, greatly contribute to desired tonality. Este interruptor le permite a su aparato estar en condition de "espera" o la condition de active. For further information on other Peavey products, ask your Authorized Peavey Dealer for the appropriate Peavey catalog/publication: Bass Guitars Guitars Bass Amplification Guitar Amplification Sound Reinforcement Enclosures Microphones Keyboards PEAVEY ONE-YEAR LIMITED WARRANTY/REMEDY PEAVEY ELECTRONICS CORPORATION ("PEAVEY") warrants this product, EXCEPT for covers, footswitches, patchcords, tubes and meters, to be free from defects in material and workmanship for a period of one (1) year from date of purchase, PROVIDED, however, that this limited warranty IS extended only to the original retail purchaser and is subject to the conditions, exclusions, and limitations hereinafter set forth: PEAVEY OO-DAY LIMITED WARRANTY ON TUBES AND METERS If this product contains tubes or meters, Peavey warrants the tubes or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase; PROVIDED, however, that this limited warranty is extended only to the original retail purchaser and is also subject to the conditions, exclusions, and limitations hereinafter set forth. cONDITIONS , EXCLUSIONS , AND LIMITATIONS OF LIMITED WARRANTIES These limited warranties shall be void and of no effect , if: a. [. . . ] Completion and mailing of WARRANTY REGISTRATION CARDS - Should notification become necessary for any condition that may require correct!This product should be used only with a cart or stand that is recommended by Peavey Electronics. Exposure to extremely high noise levels may cause a permanent hearing loss. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY DUEL 212




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY DUEL 212 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.