User manual PEAVEY COMBO 210TX

[. . . ] (41. 8 kg) Features · Three-way full range system · RXTM22 compression driver with ferrofluid cooling · 6. 5" pro mid-range in sealed subenclosure · 15" BWX Black Widow® 4" VC woofer · 1, 000 W program, 2, 000 W peak · Sound GuardTM III tweeter and mid-range protection · Trapezoidal enclosure · Stand mount adapter Description The latest version of the SPTM3 has the new BWX high power Black Widow woofer incorporated, as well as a very nice looking cabinet design. The COMBO 210TX is a three-way speaker system comprised of a 15" Black Widow BWX woofer with a Kevlar® impregnated cone, a 6-1/2" pro mid-range in a sealed sub-enclosure, and an RX 22 compression driver loaded onto a CH®3 constant directivity horn. The COMBO 210TX has a trapezoidal shaped enclosure, which reduces the build-up of standing waves inside the enclosure, which minimizes mid-bass and mid-range colorations due to the cabinet. [. . . ] It is constructed of 3/4" OSB and is covered with a durable black carpet. The enclosure corners are reinforced with polymer caps, and a black powder-coated expanded metal grille covers the lower half of the system to protect the woofer from external damage. An SA-1 stand mount adapter is built-in for ease of speaker stand use. The three-way system consists of the following driver components: a 15" Black Widow BWX woofer with a Kevlar impregnated cone, and a water-resistant treated cone and dust cap for superior environmental stability. Capable of over 500 W of continuous power handling (AES Std 2-1984), the woofer can handle a lot of sheer power. The mid-range is carried by a 6-1/2" professional grade direct radiator with a treated cone and surrounded in a sealed sub-enclosure, and it provides high articulation in the vocals. The high frequencies are handled by an RX 22 two-inch titanium diaphragm compression driver utilizing ferrofluid cooling, coupled to a CH 3 constant directivity horn. Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available. built-in, and four large rubber feet on bottom for floor use. Architectural and Engineering Specifications The loudspeaker system shall have an operating bandwidth of 54 Hz to 17 kHz. The nominal output level shall be 99. 0 dB when measured at a distance of one meter with an input of one Watt. The maximum continuous power handling be 500 Watts, maximum program power of 1, 000 Watts and a peak power input of at least 2, 000 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 45 degrees in the vertical plane. The outside dimensions shall be 33. 63 inches high by 21. 38 inches wide by 22. 88 inches deep. [. . . ] The outside dimensions shall be 33. 63 inches high by 21. 38 inches wide by 22. 88 inches deep. The loudspeaker system shall be a Peavey model COMBO 210TX. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. [. . . ]