User manual PEAVEY 800 MIXER

[. . . ] Unity gain option on single-ended to balanced side. The IATM 10/4 provides convenient interface capability for the professional recording environment. Two channels perform independent -10 to +4 level interfacing from single-ended 1/4" or RCA jacks to transformerless balanced XLR termination. The gain of these two channels is switchable between +12 dB and 0 dB (Unity). [. . . ] The remaining two channels perform independent +4 (balanced) to -10 (unbalanced) level interfacing. RCA and 1/4" jacks are provided on the -10 dBV end. 5&6 7&8 -10 dBV to +4 dBu Interface RCA Inputs (1 & 2) Provided for connection of -10 dBV nominal level sources utilizing RCA pin-type termination. (3 & 4) 1/4" Phone Inputs (3 & 4) Provided for connection of -10 dBV nominal level sources utilizing 1/4" phone termination. (1 and 2) XLR Outputs (5 & 6) Balanced termination for connecting +4 dBu nominal level equipment. Outputs Unbalanced: Balanced: Frequency response: Distortion: SNR Unbalanced out: Balanced out: Power requirements: 93 dB - Ref: -10 dBV 101 dB - Ref: +4 dB (+12 dB gain) 110 dB - Ref: +4 dBu (unity gain) External wall mount power supply (16. 5 VAC) Available in 120 V, 220 V and 240 V version 3&4 13 9 & 10 SPECIFICATIONS: Inputs Unbalanced: Balanced: -10 dBV nominal (. 316 Volts), +14 dBV maximum (5 Volts) +4 dBu nominal (1. 22 Volts) +26 dBu maximum (16 Volts) -10 dBV nominal (. 316 Volts) +14 dBV maximum (5 Volts) +4 dBu nominal (1. 22 Volts) +26 dBu maximum (16 Volts) +0, -1 dB 20 Hz to 20 kHz Less than . 005% THD +4 dBu to -10 dBV Interface XLR Inputs (7 & 8) Balanced input termination for +4 dBu nominal level sources. 1/4" Phone Outputs (9 & 10) Unbalanced output termination for connecting -10 dBV nominal level equipment utilizing 1/4" jacks. (11 & 12) RCA Outputs (11 & 12) Output termination for connecting -10 dBV nominal level equipment utilizing RCA jacks. b) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. c) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Write for our free booklet "Shock Hazard and Grounding. " Connect only to a power supply of the type marked on the unit adjacent to the power supply cord. [. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Write for our free booklet "Shock Hazard and Grounding. " Connect only to a power supply of the type marked on the unit adjacent to the power supply cord. If this product is to be mounted in an equipment rack, rear support should be provided. [. . . ]