User manual PEAVEY 260 BOOSTER DATASHEET

[. . . ] If this product is to be mounted in an equipment rack, rear support should be provided. Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug, proceed as follows: a) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or colored green and yellow. B) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. C) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. [. . . ] C) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. Government's Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation. Lors de l'utilsation sur pied ou pole de support, assurez dans le cas de déplacement de l'ensemble enceinte/ support de prévenir tout basculement intempestif de celui-ci. The MAX Series offers great sound in a small, convenient and easy-to-use package. Its design makes it perfect as a practice amplifier or for small jam sessions. (7) Headphone Input This standard 1/4" input jack allows you to connect standard stereo headphones to the amplifier. When headphones are connected to MAX Series amplifiers, the speaker is automatically turned off. As with the Gain knob, rotating this control clockwise increases gain or overall output. (9) Power Switch This two-way rocker switch applies power to the unit when placed in the ON position. Hazardous energy can be present inside the enclosure when the switch is in the OFF position. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always make sure that the equalizer and all associated equipment is properly grounded. 15 watts RMS into 4 ohms, nominal @ 1 kHz, 120 VAC line The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing: Input Sensitivity: (Clean channel, 20 Hz to 20 kHz unweighted) Greater than 78 dB below rated power 20 watts RMS into 4 ohms, nominal @ 1 kHz, 120 VAC line The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing: Input Sensitivity: Greater than 73 dB below rated power 40 watts RMS into 8 ohms, nominal @ 1 kHz, 120 VAC line The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing: Input Sensitivity: Greater than 72 dB below rated power 60 watts RMS into 4 ohms, nominal @ 1 kHz, 120 VAC line The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing, Master Volume preset at 10: Input Sensitivity: Greater than 90 dB below rated power Return Cuando se usa a la vez que la entrada Send/CD, este jack le permite completar el loop de efectos establecido al insertar la salida de la unidad de efectos en el jack de return (retorno). What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original retail purchaser of the product. [. . . ] What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original retail purchaser of the product. 2 years *(+ 3 years) 2 years *(+ 1 year) 3 years *(+ 2 years) 1 year *(+ 1 year) 2 years 1 year 90 days [*Denotes additional warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days of purchase. What Peavey Will Do We will repair or replace (at Peavey's discretion) products covered by warranty at no charge for labor or materials. [. . . ]