User manual PARROT MK6000

[. . . ] The line-out jacks can be used if your audio system features this option (use of an amplifier). Several set-ups are therefore possible, depending on the type of car stereo and your vehicle: Car stereo with an «ISO» connector (refer to the following diagram): Join the vehicle's audio and power supply cables to the female connectors of the Parrot MK6000. Note: the mute function is used to silence the sound from your car stereo to make way for a call. The choice of the mute-in jack depends on your car stereo's configuration. [. . . ] By turning the scroll wheel, the kit says the different types of phone number available for that contact: «general», «mobile», «work», «home» and «other». Important: you must first associate voiceprints with your contacts (refer to the chapter entitled «Voice recognition»). Hold down the green key on the kit for two seconds to redial the last number dialled. During a call, if you want to continue the conversation on your phone (private conversation), press the green button on the Parrot MK6000. Making a call via the voice recognition feature Say the name of the person that you wish to call after the «beep». ⷠIMPoRtant: you must have first recorded the voice prints on your phone or the kit (refer to the chapter entitled «Voice recognition»). ⷠWhen using the kit's voice recognition feature, say «home», «work», «mobile», «general» or «other» after the second beep. During a call, if you do not want the person on the other end of the line to hear you, quickly press the «Play» button on the Parrot MK6000. During a call, you can send DTMFs (Dual-Tone Multi-Frequency) for touch-tone dialling. ⷠWhen a keyword is correctly recorded, the kit automatically goes to the next. ⷠAs soon as all keywords are correctly recorded, the kit enables them automatically. ⷠYou can exit the menu at any time by pressing the red button and then go back to record or modify the keywords whenever required. ⷠIf you do not wish to record all the keywords, turn the scroll wheel to select the required word. ⷠIf you attempt to pair a sixth device, the kit says «memory full». ⷠTo pair a new phone, you must clear the memory by holding down both the green and red buttons for three seconds. caUtIon: doing so also clears all the contacts and the associated voiceprints. Note: the use of certain features (voice recognition, redial, discreet mode) depends exclusively on your phone. To use the voice recognition feature of the Parrot MK6000, you must send the contacts by Bluetooth from your phone to the kit. Press the scroll wheel or the green button: the Parrot MK6000 and the phone disconnect the kit is now ready to receive contacts. ⷠOn your phone, select the contacts and send them by Bluetooth (refer to your phone's user guide or our website). ⷠSelect «MK6000» from the list (enter 0000 as the PIN code if prompted by your phone). ⷠOnce received, the kit asks you to record the name corresponding to the contact. [. . . ] This product should not be mixed with other commercial wastes for disposal. The total or even partial reproduction, transmission or storage of this guide in any form or by any process whatsoever (elecl l tronic, mechanical, photocopy, recording or otherwise) is strictly prohibited without prior consent from Parrot. Registered trademarks All the names and trademarks mentioned in this document are copyrightlprotected and are the property of their respective owners. Modifications The explanations and specifications in this guide are given for information purposes only and may be modified without prior notice. [. . . ]