User manual PARROT DS1120

[. . . ] Standalone mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Meaning of the LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Streaming Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using several Bluetooth audio players. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Turn the speakers towards the listening point by establishing a 60 degree angle (refer to the diagram) as most of the stereo recordings are realized for this configuration. · Install your speakers at ear level: by doing so, the frequency response will be optimal. · To get the best possible reproduction of the bass frequencies, make sure there is a minimal distance of 40 cm between the back and lateral walls and the speaker. Bass frequencies will get louder if you place your speakers closer to the walls. Optimal conditions ·1=2=3 · 4 > 40 cm · 5 ~ 60° 2. Installing the Parrot USB Dongle (Windows 2000, XP & Vista) If your PC is already Bluetooth compatible, the use of the Parrot USB Dongle and the installation procedure below are not necessary. 64 MB, recommended 128 MB - Free USB port (USB 1. 1 and 2. 0 standards) - Windows® 2000, XP or Vista 1. Insert the software installation CD in the CD-ROM drive of the computer. > If you are using Windows 2000 or Windows XP, the installation process will start automatically. > If the installation does not start automatically, double click on the drive letter associated to your CD-ROM drive and double click on Setup. exe. > The «InstallShield Wizard» software will then install the various functions available with the Parrot USB Dongle. > During the installation process you may be asked to connect the Parrot USB Dongle. If the dongle is not yet plugged into the computer, you must connect it to a USB 1. 1/2. 0 - compatible port on your PC or laptop. If you want to continue the installation without connecting the Bluetooth peripheral, click on Cancel. You will then see a message confirming that the driver has been installed. > Click on Finish to end the installation process. IMPORTANT: THE USB ADAPTER IS SENSITIVE TO STATIC ELECTRICITY. THE HIGHLY SENSITIVE ELECTRICAL ADAPTER COMPONENTS CAN BE DAMAGED BY STATIC. TO PROTECT THE PERIPHERAL, ALWAYS TOUCH THE METAL CASE OF THE COMPUTER BEFORE HANDLING THE USB ADAPTER. YOU SHOULD AVOID ANY CONTACT WITH THE METAL CONNECTOR WHEN HANDLING THE USB ADAPTER. VERY DRY WEATHER OR SIMPLY WALKING ACROSS THE FLOOR CAN CAUSE A STATIC CHARGE TO BUILD UP ON YOUR BODY. 3. Connecting the Parrot DS1120 to a PC (Windows 2000, XP & Vista) - If your computer isn't compatible with the Bluetooth technology, refer to the « Installing the Parrot USB Dongle » section. - To connect easily your computer to the Parrot DS1120, use the Parrot Audio Suite software. If you have not installed this software yet, you can find it on the CD-ROM provided or download it from our website www. parrot. com, in the Support section. 1. [. . . ] - If your audio player is a PC, Check that the «Sound playback» option is set to «Highquality Bluetooth Audio». You can find this option by selecting Start/Settings/Control panel/Sound and Audio Devices/ Audio on your computer. - Check the volume of the speakers - Hold down the Configuration button on the Parrot DS1120 for two seconds, then restart the search and connect. - Check that the jack audio cable is properly plugged in to the Parrot DS1120 and audio player. [. . . ]