User manual PARROT CONFERENCE

[. . . ] This apparatus shall not be exposed to dripping or splashing and no object filled with liquid, such as vases, shall be placed on the apparatus. The AC/DC adaptor which provides disconnection from mains supply shall remain readily operable. Read these instructions keep these instructions heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings. Heat registers, stoves or other apparatus (including amplifiers ) that produce heat. [. . . ] Note : the use of CertaIN features (redIal, dIsCreet mode, dtmf, Caller Id) dePeNds exClusIvely oN your PhoNe. To access your contacts directly on the Parrot CONFERENCE, you must first send the contacts by bluetooth from your bluetooth phone. Connect the RJ11 cable to the ExT socket on the Parrot PhONE bAsE and plug the other end of the cable into a phone socket. Similarly, you can connect a wired phone by plugging your phone's cable into the lINE socket on the Parrot PhONE bAsE. Manually sending contacts to the private and public phonebooks The Parrot CONFERENCE and the phone disconnect - the device is now ready to receive contacts. ⷠOn your phone, select the contacts and send them by bluetooth to the Parrot CONFERENCE (refer to your phone's user guide or visit the support heading on our website at www. Connect the charger to the bluetooth phone base and then plug it into the mains. The orange and blue lEDs light up and then switch off, and the green lED stays on. Automatically sending contacts to the private phonebook The contacts are automatically sent from your phone to the private phonebook on the Parrot CONFERENCE by bluetooth (refer to your phone's user guide or visit the support heading on our website at www. Note: the use of CertaIN features (seNd CoNtaCts by bluetooth, automatIC CoNtaCt syNChroNIsatIoN) dePeNds exClusIvely oN your PhoNe (suPPort of the haNds-free or headset ProfIle). - browse through the menus by turning the wheel and confirm with the green button or by pressing the scroll wheel. - software update (by bluetooth): enable this option before updating via bluetooth (www. Doing so will increase the number of devices compatible with your Parrot CONFERENCE. - Information: this submenu provides information on the software built into the Parrot CONFERENCE. If you have not paired the devices, the orange and blue lEDs on the phone base flash. Hold down the «Mode» button on the phone base for five seconds and then release. - The list of bluetooth devices that are used and can be used with the Parrot CONFERENCE is displayed. If it has not been detected, select the «More devices» option at the bottom of the list. The Parrot CONFERENCE will update its screen by informing you that a connection has been established between both devices. Making a call from your phone base : - Connect to the phone base from the Parrot CONFERENCE. To do so, press one of the magic keys and select your Parrot PhONE bAsE. - A new menu appears; select the «Default» option. [. . . ] - An incoming call is indicated by a ringtone and the lEDs of the magic keys flashing quickly on the Parrot CONFERENCE - Press the green button on the device to answer the call. Making a call from the VoIP phonebook on the Parrot CONFERENCE - Turn the central scroll wheel until the VoIP menu is displayed and then confirm. Making a call from the public phonebook on the Parrot CONFERENCE - Turn the central scroll wheel until the «Public phonebook» menu is displayed and then confirm. - If your contact has several phone numbers, select the appropriate phone number using the scroll wheel. [. . . ]