User manual PARROT 3400 LS-GPS

[. . . ] The CK3000 EVOLUTION offers you the following features: Wireless radio connection with your mobile phone Full duplex hands-free conversations with echo cancellation Background noise reduction Voice recognition (up to 150 names) * Automatic muting of the car stereo and connection to your vehicle's speakers Registering of up to three mobile phones * Feature only available with certain mobile phones. If your CK3000 EVOLUTION is installed by a professional, skip directly to the next chapter, entitled «Getting Started». The CK3000 EVOLUTION comprises an electronic control unit, a microphone, a 2-key remote control and two ISO connector plugs for the car stereo. Electronic control unit: Do not install the control unit near the vehicle's heater or air conditioning unit. [. . . ] when you turn the scroll wheel , the kit announces the languages available (English , French , German , Spanish , Italian , and so on). When you hear the required language, confirm by clicking the central button or green button. Adjusting the Volume When Using for the First Time Click the central button - the kit says «LANGUAGE» and then the name of the language currently used by the kit. Turn the scroll wheel towards the right to increase the volume or towards the left to decrease the volume. When you are happy with the level, confirm by clicking the central button or green button. Pairing The first time that you switch the kit on, you must pair your mobile phone with the hands-free kit. For further information, refer to the chapter entitled «Pairing» in your mobile phone's user guide or check out the www. Enter the link code (1234) when prompted by your phone and then confirm. The CK3000 EVOLUTION connects to your phone and says «pairing successful». All the menus are now available when you click the central button and their name is announced by the hands-free kit when you turn the scroll wheel. You are now connected to the hands-free kit and can use it to make and receive calls. Adding Voiceprints * Click the central button - the kit says «LANGUAGE» and then the name of the language currently used by the kit. Turn the scroll wheel until the kit says «ADD VOICEPRINTS». The kit disconnects from the phone and is now ready to receive your contact names. Html On the left of the screen, click on the «Bluetooth phones» heading: by choosing the required phone, you can access all the configuration procedures. Magic Words Magic words are used to accept an incoming call or end a call, as well as activate the voice recognition feature without taking your hands off the wheel. Click the central button - the kit says «LANGUAGE» and then the name of the language currently used by the kit. Turn the scroll wheel until the kit says «MAGIC WORDS» and the current status («ACTIVATED» or «DEACTIVATED»). If you are happy with the status, you can go to the next menu by turning the scroll wheel or exit the menu by clicking the red button. If you wish to change the status, click the central button or green button. If you choose to activate the magic words but have not yet recorded the words «PHONE» and/or «HANG UP», the kit automatically switches to record mode. Once the magic words have been successfully recorded, they will be activated. [. . . ] Warning : The «Multi-Tel» function is now compatible with the T68i, T610, T616, T618, Z600 and Z608 (with specific software versions). This function is available when the «Powersave» mode is activated in the phone, i. Once this mode activated, the CK3000 EVOLUTION has to identify every phone in this new mode. It should be necessary to connect separately each phone with the CK3000 EVOLUTION and restarting it between each identification. [. . . ]