User manual PARKSIDE PSS 250

[. . . ] The manufacturer declines to accept responsibility for damage(s) arising out of usage contrary to the instructions specified below. The appliance is not meant for commercial use. 6 GB/IE/CY Delivery contents Orbital sander PSS 250 Sanding sheet (Grit 120), see Fig. D Operating manual 1x 1x 1x 1x 1x Introduction / General safety advice for electrical power tools Q Technical Data 230 V ~ 50 Hz 250 W n0 7. 000 - 12. 000 rpm n0 14. 000 - 24. 000 rpm Hook and loop fastening 93 x 185 mm Clamp fastening 93 x 230 mm II / Nominal voltage: Nominal power: Idle speed: Idle oscillation speed: Sanding sheet dimensions: General safety advice for electrical power tools WarNING!Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. [. . . ] Personal safety a) remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. 8 GB/IE/CY 4. Careful handling and use of electrical power tools a) Do not overload the device. always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. General safety advice for electrical power tools d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. in accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. J always run the power cord away J J J J J J J J appliance-specific safety Instructions To avoid the risk of injury or fire as well as health risks: J When working outdoors, connect the appliance via a residual current circuit-breaker with a maximum breaking current of 30 ma. J In case of danger, immediately pull the power plug from the socket. J J J J from the appliance to the rear. The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. J Only use accessories and tools that are specified WarNING!NOTE: Before attaching a new sanding pad 9 , remove dust and dirt from the sanding plate 8 . Sanding sheets with hook and loop fastening: j Fix one side of the sanding sheet 9 flush with one side of the backing plate 8 . [. . . ] Have your device repaired only by qualified specialist personnel using original manufacturer parts only. If the plug or mains J lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. Q Warranty Disposal The packaging is made from environmentally-friendly material and can be disposed off at your local recycling plant. Do not dispose of electrical appliances in normal household refuse! This appliance is guaranteed for 3 years from the date of purchase. [. . . ]