User manual PARKSIDE PSBS 24 A1 CORDLESS HAMMER DRILL

[. . . ] When drilling into Sound pressure level: Sound power level: Sound pressure level (Impact drilling in concrete): Sound power level (Impact drilling in concrete): Uncertainty K: ). Carrying case Rechargeable impact drill / driver with rechargeable battery pack Auxiliary handle Bits Charger Operating instructions Wear ear protection!Total vibration (vector sum of three directions) is calculated in accordance with EN 60745: Drilling in metal: Vibration emission value ah, D = 1. The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. [. . . ] Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions Use and handling of the cordless electrical power tool A) Charge a rechargeable battery unit using only the charger recommended by the manufacturer. chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used. B) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire. C) When they are not being used, store rechargeable battery units away from paperclips, coins, keys. Nails, screws or other small metal objects that could cause the contacts to be bridged. Shortcircuiting the contacts of a rechargeable battery unit may result in heat damage or fire. General safety advice for electrical power tools / Preparing for use D) Fluids may leak out of rechargeable battery units if they are misused. [. . . ] Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. Com Do not dispose of rechargeable batteries with your household refuse!Defective or exhausted rechargeable batteries must be recycled in accordance with Directive 2006 / 66 / EC. [. . . ]