User manual PARKSIDE PSBM 850

[. . . ] If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Q metal, ceramics and plastic. The clockwise/counter clockwise rotation direction switch also allows the device to be used as a driver. Any other use or modification to the device shall be considered as improper use and could give rise to considerable risk of accident. The manufacturer will not accept liability for loss or damage arising from improper use. [. . . ] One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. 8 GB/IE/CY E3334_PSBM 850_Content_LB6. indd 8 11. 04. 2008 13:28:29 Uhr General safety advice for electrical power tools carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. d) remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. By doing this you will be in a better position to control the device in unforeseen circumstances. Loose clothing, jewellery or long hair can become trapped in moving parts. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. in accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. 4. Avoid drilling paints containing lead or other substances hazardous to health. Do not drill moist materials or damp surfaces, When working always hold the device securely with both hands. If the inserted tool jams, switch off the electrical power tool immediately. [. . . ] Have your device repaired only by qualified specialist personnel using original manufacturer parts only. If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or his service centre. This will ensure that your device remains safe to use. Screwdriving the screw head. Set the drill / hammer-action switch 1 to the drill symbol and select 1st gear. j The screwdriver attachments and bits must match Q Servicing and cleaning WarNING! [. . . ]