User manual PARKSIDE PSBM 1100

[. . . ] Dangerous electric current ­ danger to life! Protection category II power tool; double insulated Proper procedure and handling. Keep children and uninvolved other third parties at a distance when using electrical power tools. Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cable and the power plug. [. . . ] J Have repairs carried out only by an electrician or your service centre. J Do not touch the mains lead if it becomes damaged or cut through while you are using the device. Pull the plug out of the mains socket immediately and have the device repaired by a suitably qualified person or at your service centre. J Do not operate the device if it is damp and do not use it in a damp environment. J If you use the device outdoors, always connect it through a residual current device (RCD) with a maximum trip current of 30 mA. If using an extension lead, always use one that is approved for outdoor use. J o not work in areas where there may be D hidden electricity cables or gas or water pipes. Penetration 8 GB/IE of a water pipe can lead to property damage or to electric shock. To avoid the risk of injury: Wear protective glasses, hearing protection (noise can lead to hearing loss), dust protection mask and protective gloves. Please note that working on stone or metal can give rise to hazardous dusts that can adversely affect your health. J e particularly careful when screwing in longer B screws - the driver could slip off the screw head. This is much safer than holding it in your hand and it means you then have both hands free to operate the electrical power tool. J J J J J If a dangerous situation arises, pull the mains plug immediately out of the mains socket. Before you insert the mains plug into the socket, always check that the device is switched off. [. . . ] j elect between the following speed ranges S using the gear selector switch 7 : 1 = low speed range 2 = high speed range Disposal The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre. 10 GB/IE Disposal / Information Do not dispose of electrical tools with household rubbish!In accordance with European Directive 2002 / 96 / EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical tools must be collected separately and taken for environmentally compatible recycling. Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices. M anufacturer`s declaration of conformity We, Kompernaß Handelsgesellschaft mbH, Burgstr. [. . . ]