User manual PARKSIDE PSB 1050 A1

[. . . ] The appliance is suitable for percussion drilling into brick, concrete, stone and drilling into wood, metal, ceramic and plastic (see Figs. Thanks to its anticlockwise / clockwise rotation, the appliance can also be used as a screwdriver. When drilling into granite, we recommend you use a heavy - duty hammer drill (rock drilling hammer). Any other use Introduction / General safety advice for electrical power tools 5 m / s2 The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. [. . . ] C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. If a dangerous situation arises, pull the mains plug immediately out of the mains socket. Always work with the mains lead leading away from the rear of the device. Always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. Working with harmful / poisonous dusts presents a danger to health for the tool operator and any persons in the vicinity. Avoid drilling paints containing lead or other substances hazardous to health. When working with electrical tools, hold them firmly in both hands and make sure that your footing is secure. Using both your hands to hold electrical tools ensures safer operation of them. General safety advice for electrical power tools / Before first use ½ If the inserted tool jams, switch off the electrical power tool immediately. When carrying out work during which the insertion tool could hit hidden power cables or the power cable of the appliance itself, hold the appliance by the insulated handling surfaces. Contact with a live cable can also make metal appliance parts alive and cause an electric shock. Wait until the electrical tool has come to a standstill before putting it down. [. . . ] Switch the device off and pull the plug out of the mains socket before carrying out any work on the device. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made unter warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. [. . . ]