User manual PARKSIDE PPHSS 730 SE

[. . . ] To help you do this please read the accompanying operating instructions. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. © Proper use The device is suitable for making straight, curved and bevel cuts in blocks or sheets of plastic, wood and metal. The device is designed to be used in dry rooms and for domestic purposes only. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. [. . . ] Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. A tool or spanner left attached to a rotating part of a device can lead to injury. By doing this you will be in a better position to control the device in unforeseen circumstances. Loose clothing, jewellery or long hair can become trapped in moving parts. If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. c) d) e) f) g) 4. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. 3. Personal safety a) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of 8 GB/IE/CY General safety advice for electrical power tools b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. ½ After switching off do not brake the saw blade 14 by pressing it sideways against an object. It could cause the saw blade 14 to be damaged, break or initiate a kickback. GB/IE/CY 9 General safety advice for electrical power tools / Preparing for use ½ Use only undamaged, defect-free saw blades. Distorted or blunt saw blades can break or cause a kickback. any of these saw blades provided they have the correct shank fitting (single lug shank). © Mounting / replacing saw blades © Original accessories / attachments tailed in the operating instructions. [. . . ] Do not dispose of electrical power tools with the household rubbish! © Warranty This appliance is guaranteed for 3 years from the date of purchase. It has been carefully produced and meti-culously checked before delivery. Contact your service centre by telephone in case of questions pertaining to the warranty. This warranty applies only to the initial purchaser and is non-transferable. [. . . ]