User manual PARKSIDE PPHSS 730

[. . . ] To help you do this please read the accompanying operating instructions. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Q Proper use The device is suitable for making straight, curved and bevel cuts in blocks or sheets of plastic, wood and metal. The device is designed to be used in dry rooms and for domestic purposes only. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. [. . . ] Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e. g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. e) When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock. f) Use a residual current device (rCD) for protection if operating the electrical power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock. 8 GB/IE/CY General safety advice for electrical power tools 4. areful handling and use of C electrical power tools a) o not overload the device. always D use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) ull the mains plug out of the socket P before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. d) hen not in use always ensure that W electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. J Switch off the electrical power tool after completing each stage of work but do not withdraw the saw blade 14 from the cut until after it has come to a standstill. GB/IE/CY 9 General safety advice for electrical power tools / Preparing for use J After switching off do not brake the saw blade 14 by pressing it sideways against an object. [. . . ] Switching on: j Push the On / OFF switch 2 into position "I" and ensure it engages. Switching off: j Press the rear part of the On / OFF switch 2 . j GB/IE/CY 11 Maintenance and cleaning / Disposal / Information Q Q Maintenance and cleaning Maintenance Replace the saw blade 14 as soon as its teeth become blunt and it starts to produce defective saw cuts. If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. Q Cleaning Carry out that cleaning of the device when you have finished sawing. [. . . ]