User manual PARKSIDE PMFW 280 A2

[. . . ] Multi-Purpose Tool PMFW 280 A2 Plunge saw blade (20 mm) Plunge saw blade (32 mm) Clamping screw and clamping plate (prefitted) Backing plate Introduction / General safety advice for electrical power tools Segment saw blade Scraping knife Sanding sheets Allen key Operating instructions General safety advice for electrical power tools Read all the safety advice and instructions!Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. 280 W 230 V 50 Hz n0 15000­21000 min-1 II / Keep all the safety advice and instructions in a safe place for future reference!The term "electrical tool" used in the safety advice refers to electrical tools powered by mains electricity (by means of a mains lead) and electrical tools powered by rechargeable batteries (without a mains lead). [. . . ] Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Use the electrical power tool only for dry abrading / sawing / cutting. Do not operate the device if it is damp and do not use it in a damp environment. water entering an electrical device increases the risk of electric shock. Use a suitable detector to locate concealed services supply cables / pipes or approach your local public utilities services providers. [. . . ] Use a dry cloth to clean the housing ­ under no circumstances use petrol, solvents or cleaning agents that attack plastic. Have your device repaired at the service centre or by qualified specialist personnel using original manufacturer parts only. If the plug or lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following standards, normative documents and EU directives: Machinery Directive (2006 / 42 / EC) EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) Applicable harmonized standards EN 60745-1:2009+A11 EN 60745-2-4:2009 EN 55014-1:2006+A1 EN 55014-2:1997+A1+A2 EN 61000-3-2:2006+A1+A2 EN 61000-3-3:2008 Type / Device description: Multi-Purpose Tool PMFW 280 A2 Date of manufacture (DoM): 09­2011 Serial number: IAN 69209 Bochum, 30. [. . . ]