User manual PARKSIDE PMFW 200

[. . . ] Not suitable for commercial use. Q Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the accompanying operating instructions. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Q Features and equipment ON / OFF switch Oscillation speed setting wheel Dust extraction port Ventilation slots Tool mount Clamping screw with washer Plunge saw blade Allen key Sanding sheet Backing plate Segment saw blade Adapter for external vacuum extraction Reducer piece Proper use The device is intended for sawing, cutting and sanding. The preferred materials on which the device can be used are: wood, plastic, drywalling, non-ferrous metals, fixings (e. g. [. . . ] Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. e) When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock. f) Use a residual current device (rCD) for protection if operating the electrical 8 GB/IE/CY General safety advice for electrical power tools 4. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. in accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. Any harmful / noxious dusts generated from sanding represent a risk to the health of the person operating the device and to anyone near the work area. Ensure that there is adequate ventilation when working on plastic, paint, varnish etc. Do not soak the materials or the surface you are about to work on with liquids containing solvents. Q Q Assembly Selecting the right tool J J Segment saw blade 11 Materials: Wood, plastic, non-ferrous metals Use: · Cutting and plunge sawing · Close to the edge sawing, even in difficult to access areas Example: Parquet including floor coverings, also with plunge cuts. J J Q Advice on use Principle of operation: The oscillating drive causes the attached tool to vibrate backwards and forwards up to 21. 000 times per minute. This means the tool can produce precise work in the tightest of spaces. [. . . ] It has been carefully produced and meti-culously checked before delivery. Contact your service centre by telephone in case of questions pertaining to the warranty. Your goods 12 GB/IE/CY Information can be transmitted free of cost only in this manner. This warranty applies only to the initial purchaser and is non-transferable. [. . . ]