User manual PARKSIDE PHS 160 B2

[. . . ] the device is particularly suitable for corners , profiles or difficult to access places. Any other use or modification to the device shall be considered as improper use and Introduction / General safety advice for electrical power tools General safety advice for electrical power tools Read all the safety advice and instructions!Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. Keep all the safety advice and instructions in a safe place for future reference! [. . . ] An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. General safety advice for electrical power tools / Preparing for use and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. When sanding wood and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. Ensure that there is adequate ventilation when working on plastic, paint, varnish etc. Do not soak the materials or the surface you are about to work on with liquids containing solvents. Avoid sanding paints containing lead or other substances hazardous to health. Never use the device for a purpose for which it was not intended nor with non-original parts / accessories. The use of tools or accessories other than those recommended in the operating instructions could lead to you suffering an injury. [. . . ] To achieve the best sanding results you should use unworn, undamaged sanding sheets. Sand difficult to reach places with the front or side corners of the backing plate 7 . After sanding the workpiece, lift the device from the workpiece before switching it off. Have the replacement carried out by the manufacturer or its service centre. [. . . ]