User manual PARKSIDE PFS 710 A1 SABRE SAW

[. . . ] Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. Introduction / General safety advice for electrical power tools 20 mm Wood 160 mm Aluminium 18 mm Steel 8 mm Saw blade mount size: 1/2" Protection class: Noise and vibration data: Measured value for sound determined in accordance with EN 60745. The A-weighted sound level of the electric power tool is typically: Sound pressure level: 86 dB(A) Sound power level: 99 dB(A) Uncertainty K: 3 dB Wear ear protection! [. . . ] Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. D) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. General safety advice for electrical power tools Aged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. When sawing building materials, observe the statutory requirements and the manufacturer's recommendations. Switch the device on before you bring it into contact with the workpiece. Do not allow the blade to come into contact with a solid object or the floor when the device is operating ­ danger of kickback!The shoe 5 must always lie against the workpiece when the device is sawing. Do not put the device down before it has been switched off and has reached a standstill. [. . . ] The warranty period will not be extended by repairs made unter warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices. [. . . ]