User manual PARKSIDE PFS 280 A1

[. . . ] Any other use or modification shall be deemed to be improper use and could give rise to considerable risk of accident. We will not accept liability for loss or damage arising from improper use. 1 Paint spray system PFS 280 A1 1 Carrying strap 2 Nozzles (1x round jet, 1x wide jet) 1 Air hose 2 Protective caps 1 Measuring cup 1 Operating instructions Introduction / General safety advice for electrical power tools General safety advice for electrical power tools Read all the safety advice and instructions!Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. [. . . ] Wear additional personal protective equipment such as appropriate protective gloves and protective masks or respirators when spraying or handling chemicals. the wearing of protective equipment in such conditions reduces exposure to harmful substances. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Careful handling and use of electrical power tools Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. General safety advice for electrical power tools / Before use Sprayed can even penetrate the skin through a glove and be injected into your body. A high pressure jet may inject toxins into the body and cause serious injuries. If the spray is injected into the skin, seek medical help immediately. Note the markings on the container or the manufacturer's information relating to the material being sprayed, including the instruction to use personal protective equipment. The manufacturer's in-structions must be followed to reduce the risk of fire, as well as injuries caused by toxins, carcinogens, etc. The use of a special nozzle insert with the appropriate nozzle head reduces the probability of a high-pressure jet penetrating the skin and injecting toxins into the body. If the nozzle insert becomes blocked during spraying, follow the manufacturer's instructions and switch of the device and release the pressure before you remove the nozzle for cleaning. Liquids under high pressure can penetrate the skin and inject the body with poison, which can lead to serious injuries. Keep the mains lead plug and the spray gun trigger free of paint and other liquids. [. . . ] Turn the nozzle into the desired position and tighten the union nut 9 again. The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. [. . . ]