User manual PARKSIDE PFS 710A

[. . . ] The sabre saw is suitable for rough sawing work, straight and curved cuts and sawing flush. Please heed the information on saw blades and the advice on working with your saw. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. [. . . ] By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and A) remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Make sure that the switch is in the "oFF" position before you insert the mains plug into the mains socket. Accidents can happen if you carry the device with your finger on the switch or you have already switched the device on before you connect it to the mains. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. J Switch the device on before you bring it into contact with the workpiece. Do not allow the blade to come into contact with a solid object or the floor when the device is operating ­ danger of kickback!J The shoe 7 must always lie against the workpiece when the device is sawing. [. . . ] Tilt the sabre saw forward and plunge the saw blade into the workpiece. Bring the sabre saw vertical and continue sawing along the cutting line. About ways of working when sawing Before sawing, check the workpiece for foreign bodies such as nails, screws etc. Switch the device on first and only then bring it into contact with the workpiece. [. . . ]