User manual PARKSIDE PFLK 15 SOLDERING PENCIL

[. . . ] Before heating the tool check that the soldering tip is firmly seated - the clamping screw must be fully tightened. When removing the soldering tip make sure that the soldering pencil is switched off and do not use too much force. Place the soldering pencil in the stand during any pauses in your work. [. . . ] Do not use tools for other purposes than those for which they are intended, for example do not use a manual circular saw for cutting tree trunks and timber. Do not wear wide clothes or jewellery since they might be caught by mobile parts. When working in the open, rubber gloves and non-skid footwear is recommended. For work which produces splinters, swarf or dust or when working overhead always wear eye protection, with an appropriate protective mask. If devices for the connection of dust suction equipment and collectors are available, ensure that these are connected and properly used. This guarantees a safer hold than with a single hand and allows you to operate the power tool with both hands. Keep your tools clean and sharp to be able to perform better and safer work. Observe the service instructions and the note regarding change of tools. Check the cable of the tool regularly and in case of damage, ask for professional repair. When power tool is not used, before maintenance and when changing tools, such as saw blade, drill, hob. Before switching on device, ensure that the keys and adjustment tools are removed. Do not carry any tools connected to the mains supply with your finger on the switch . Ensure that the switch is off when plugging instrument into socket. Only use authorized and respectively marked extensions for use in the open. Before further use of the power tool, the protection devices or any lightly damaged parts must be carefully examined. Check whether the mobile parts function correctly and do no jam or if any parts are damaged. All parts must be mounted correctly and meet all conditions to guarantee perfect operation of power tool. Any damaged protection devices and parts must be repaired professionally by a recognized expert workshop or exchanged, unless otherwise stipulated in the operation manual. If you lend or hand over tools to another person make sure you explain how to handle the equipment. [. . . ] Beaver Electronic Services · The Lodge, Premier Business Park Long Street, Walsall · West Midlands, WS2 9DY Tel. : 01922/725554 · Fax: 01922/725417 Warranty This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. [. . . ]