User manual PARKSIDE PEXS 270 A1 MANUAL 7

[. . . ] Introduction / General safety advice for electrical power tools Sanding plate: Protection class: ø 125 mm II / The term "electrical tool" used in the safety advice refers to electrical tools powered by mains electricity (by means of a mains lead) and electrical tools powered by rechargeable batteries (without a mains lead). Noise and vibration data: Measured values for noise are determined in accordance with EN 60745. The A-weighted noise level of the electrical power tool are typically: Sound pressure level: 83 dB(A) Sound power level: 94 dB(A) Uncertainty K: 3 dB Wear ear protection!The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. [. . . ] By doing this you will Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use General safety advice for electrical power tools the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. ½ Grinding dust in the dust sack, microfilter, paper sack (or in the filter sack or filter of the vacuum cleaner) can ignite automatically under unfavour-able conditions such as flying sparks when metal is being ground. There is a par-ticular hazard if the grinding dust is mixed with paint or polyurethane residues or other chemical substances and the material being ground is hot after being worked on for a prolonged period. The working of materials that can produce harmful / toxic dusts presents a health risk for the operator and for people located in the close vicinity. When working for extended periods on wood and, in particular, materials that produce dusts that are hazardous to health, connect the appliance to an appropriate external suction device. provide for sufficient ventilation when working plastics , varnishes and paints. Do not soak materials or surfaces to be worked with liquids containing solvents. The penetration of water into the electric device increases the risk of an electric shock. [. . . ] The warranty period will not be extended by repairs made unter warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following standards, normative documents and EU directives: Machinery Directive (2006 / 42 / EC) EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) Applicable harmonized standards EN 55014-2:1997/A1:2001/A2:2008 EN 55014-1:2006, EN 55014-2/A2:2008 EN 60745-1:2009, EN 60745-2-4:2009 EN 61000-3-2:2006, EN 61000-3-3:2008 EN 62233:2008 IEC 60745-1:2006, IEC 60745-2-4/A1:2008 IEC 60745-1:2006, IEC 60745-2-4:2002 Type / Device description: Random orbital sander PEXS 270 A1 Date of manufacture (DOM): 09 - 2010 Serial number: IAN 56848 Do not dispose of electrical power tools with the household rubbish! [. . . ]