User manual PARKSIDE PES 200 A1 ELECTRIC SCRAPER

[. . . ] Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. 2 mm Protection class: II / Noise and vibration data: Measured values for noise are determined in accordance with EN 60745. The A-weighted noise level of the electrical power tool are typically: Sound pressure level: 78 dB(A) Sound power level: 85 dB(A) Uncertainty K: 3 dB Wear ear protection! evaluated acceleration , typical: Hand / arm vibration ah = 8 m / s2 Uncertainty K = 1 , 5 m / s2 WARNING! [. . . ] Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. General safety advice for electrical power tools / Before taking tool into use The device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Unhealthy / poisonous gases may develop from the heat generated by scraping. Under no circumstances should you place your hands next to or in front of the appliance or on the area to be worked, you could be seriously injured if you slip or stumble. In the event of danger, immediately remove the plug from the power socket. The use of ancillaries and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. [. . . ] Repairs made after the expiration of the warranty period are subject to payment. Before you clean or maintain the device always pull the mains lead out of the mains socket. Clean the attachment tools of all remains of adhesives and other grime. Never use fuel, solvents or aggressive cleansers that could damage plastic. [. . . ]