User manual PARKSIDE PEBS 600

[. . . ] If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Q Features and equipment Belt speed adjuster wheel Recesses for clamp mounting ON / OFF switch Lock button for ON / OFF switch Dust box Release button for dust box Belt adjuster screw Sanding belt Adapter port Tensioning lever for sanding belt Clamps Adapter for external vacuum extraction Reducer piece Proper use The belt sander is designed for dry sanding of large surfaces of wood, plastic, metal, plaster and painted surfaces. Always use a sanding belt and grade of grit suitable for the particular surface you are sanding. Any other use or modification to the device shall be considered as improper use and 6 GB/IE/CY 1 2 3 4 5 6 7 8 9 10 11 12 13 Q Included items 1 Belt sander 600 Watt 1 Sanding belt 1 Dust collection box Introduction / General safety advice for electrical power tools 1 Vacuum extraction adapter and reducer piece (for external vacuum extraction) 2 Clamps 1 Operating instructions Q General safety advice for electrical power tools WarNING!Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. [. . . ] This precaution is intended to prevent you from unintentionally starting the device. 3. Personal safety a) remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. 8 GB/IE/CY General safety advice for electrical power tools / Preparing for use d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. in accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The mains voltage at the mains socket must match that shown on the rating plate on the device. Devices marked with 230 V can also be operated at 220 V. GB/IE/CY 9 Preparing for use Q Tensioning / changing the sanding belt WarNING!Before you carry out any work on the belt sander always pull the plug out of the mains socket. Then release the tensioner for the sanding belt by moving the tensioning lever 10 fully outwards (see fig. Next insert a new sanding belt 8 or change the belt for one suitable for a different material or one with a different grit size. IMPOrTaNT: The direction of the arrows on the inside of the sanding belt 8 must agree with that on sander housing. adjusting the sanding belt path manually: If the belt does not run centrally when switched on, you may have to adjust the sanding belt manually. j To do this, turn the adjuster screw 7 on the front roller until the sanding belt 8 runs centrally. IMPOrTaNT: Always make sure that the sanding belt 8 does not cut into the housing. Check the sanding belt regularly and if necessary re-adjust it using the adjuster screw 7 . Q Sanding procedure: j With the sander switched on, bring it into contact with the workpiece and move it forward carefully. [. . . ] This will ensure that your device remains safe to use. Q Bilston (Great Britain) WV14 7EG Tel. : 0870 / 787-6177 0870 / 787-6168 Fax: e-mail: support. uk@kompernass. com IE Kompernaß Service Ireland Tel. : 1850 930 412 (0, 082 /Min. ) * Standard call rates apply. e-mail: support. ie@kompernass. com Q Warranty Declaration of conformity / Producer This appliance is guaranteed for 3 years from the date of purchase. It has been carefully produced and meti-culously checked before delivery. Contact your service centre by telephone in case of questions pertaining to the warranty. [. . . ]