User manual PARKSIDE PDSP 1000 A1 SANDBLASTER GUN

[. . . ] To help you do this, please read the accompanying operating instructions. If you pass the sandblasting gun on to anyone else, please ensure that you also pass on all the documentation. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. [. . . ] Disconnect the device from the compressed air source before filling it with blast medium. Use only materials for the blast medium that are suitable for the sandblasting gun. Take precautions to ensure that other people are not contaminated (dust generation). Ensure that the spent blast medium is trapped and collected so that it can be disposed of in an environmentally compatible manner. Do not remove rating plates or labels - they are safety-relevant parts of the device. If you are inexperienced in the use of this type of device, you should seek out information or training to learn how to handle it safely. NOTE: Operate the sandblasting gun 1 only with cleaned, condensate- and oil-free compressed air and never exceed the maximum working air pressure at the device of 8 bar. NOTE: The compressed air source must be fitted with a (filter) / pressure reducer so that the air pressure can be regulated. Connect the sandblasting gun to a suitable compressed air source by connecting the quick-release coupling of the air supply hose with the plug-in nipple 3 to the sandblasting gun 1 . Fill the blast medium container 4 with the desired amount of blast medium. ensure that the maximum capacity of the container (1000 ml) is not exceeded. Screw the blast medium container 4 back on and lock it in place by inserting and turning it on to the container lid (see Figs. Ensure that there is always a minimum distance of 20 cm between the sandblasting gun 1 and the surface being sand blasted. After you finish work, disconnect the device from the compressed air source. NOTE: First disconnect the hose from the compressed air source and only then disconnect the compressed air supply hose from the device. This will ensure that the compressed air supply hose does not wave around in an uncontrolled manner. Always disconnect the device from the compressed air source before you clean or maintain it. Clean the sandblasting gun 1 and blast medium container 4 after you finish working. [. . . ] Repairs made after the expiration of the warranty period are subject to payment. The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. For details of disposing of the appliance at the end of its useful life, please contact your district or city council. [. . . ]