User manual PARKSIDE PDFP 500 A1 MANUAL 4

[. . . ] Remain alert at all times, pay attention to what you are doing and use common sense in your work. Do not use any device when you are tired or under the influence of drugs, alcohol or medications. Do not remove rating plates or labels - they are safety-relevant parts of the device. If you are inexperienced in the use of this type of device, you should seek out information or training to learn how to handle it safely. [. . . ] First disconnect the hose from the compressed air source and only then disconnect the compressed air supply The use of accessories other than those recommended in the operating instructions could lead to you being in danger of injury. Safety advice / Initial use safety instructions for fine spray systems ½ Keep your work area clean, well lit and free of paint or solvent containers, rags and other combustible materials. Ensure good ventilation in the spraying area and sufficient quantities of fresh air through-out the room. Do not spray or clean with materials with a flashpoint below 21°C. Do not spray in the area of ignition sources such as static electricity sparks, open flames, pilot lights, hot objects, motors, cigarettes and sparks from inserting and disconnecting power cords or the operation of switches. Do not spray any materials for which it is not known whether they pose a danger. Wear additional personal protective equipment such as appropriate protective gloves and protective masks or respirators when spraying or handling chemicals. the wearing of protective equipment in such conditions reduces exposure to harmful substances. The material being sprayed can even penetrate the skin through a glove and be injected into your body. A high pressure jet may inject toxins into the body and cause serious injuries. If the spray is injected into the skin, seek medical help immediately. After the nozzle has been cleaned the thread and seal have to be lightly treated with grease. Compressed air-operated equipment should only be repaired by qualified specialists and with original spare parts. NOTE: Thorough cleaning after each use is very important for safety and operation. Otherwise, for example, the nozzle will become clogged and the proper functioning of the device can no longer be guaranteed. ½ Wear suitable protective gloves when carrying out cleaning work. ½ Do not use any hydrocarbon-containing halogen solvents such as trichloromethyl, ethyl chloride, etc. , as they undergo chemi-cal reactions with some materials in the paint spray gun. After every use spray thinner (only in the open air ­ danger of explosion!First unscrew the nozzle head 9 by turning in an anticlockwise direction . loosen and remove the nozzle 10 by unscrewing it with the installation spanner 11 in an anticlockwise direction - see also Figure B. Clean the needle 12 and the nozzle 10 carefully with the brush 13 - see also figures C and D. [. . . ] In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]