User manual PARKSIDE PABS10.8-LI

[. . . ] Introduction / General safety advice for electrical power tools Maximum drill diameter: Steel: Wood: the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working. [. . . ] A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. General safety advice for electrical power tools B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. There is the danger of fire if other types of rechargeable battery units are used. B) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire. C) When they are not being used, store rechargeable battery units away from paperclips, coins, keys. Nails, screws or other small metal objects that could cause the contacts to be bridged. Shortcircuiting the contacts of a rechargeable battery unit may result in heat damage or fire. Fluids may leak out of rechargeable battery units if they are misused. [. . . ] If this product has been subjected to improper or inappropriate handling, abuse, or interventions not carried out by one of our authorised sales and service outlets, the warranty will be considered void. Place the direction of rotation switch 5 into the middle position before carrying out any tasks on the device, e. Always pull the mains adapter 13 out of the mains socket and remove the battery pack before you clean or maintain the device. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following standards, normative documents and EU directives: EC machine guideline (2006 / 42 / EC) EC Low Voltage Directive (2006 / 95 / EC) EMC Electromagentic Compatibility (2004 / 108 / EC) Type / Appliance Designation: Lithium-Ion Cordless Drill PABS 10. [. . . ]