User manual PARKSIDE PABS 18 A1 ANNEXE 3

[. . . ] The A-weighted noise level of the electrical power tool are typically: Sound pressure level: 66 dB(A) Sound power level: 77 dB(A) Uncertainty K: 3 dB Total vibration (vector sum of three directions) is calculated in accordance with EN 60745: Drilling in metal: Vibration emission value ah, D = 1. 1 Cordless drill with rechargeable battery pack 1 Double bit 1 Fast charger 1 Carry case 1 Directions for use The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. [. . . ] C) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working prop- Use and handling of the cordless electrical power tool A) Charge a rechargeable battery unit using only the charger recommended by the manufacturer. chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used. B) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire. C) When they are not being used, store rechargeable battery units away from paperclips, coins, keys. Nails, screws or other small metal objects that could cause the contacts to be bridged. Shortcircuiting the contacts of a rechargeable battery unit may result in heat damage or fire. Fluids may leak out of rechargeable battery units if they are misused. General safety advice for electrical power tools / Before first use Additional medical help if any of the fluid gets into your eyes. Take steps to ensure that you do not hit upon any service lines (electricity, gas, water) when working with electrical appliances. Check, if need be with a service line detector, before you start to cut or bore into a surface. Held in a clamp or vice is kept more securely in place than one held by your hand. Harmful / noxious dusts generated from your work represent a risk to the health of the person operating the device and to anyone near the work area. High reaction torques may occur momentarily during tightening or loosening of screws. If the inserted tool jams, switch off the electrical power tool immediately. The inserted tool may jam if the electrical power tool is overloaded or is held at an angle to the workpiece. [. . . ] Never use petrol, solvents or cleaning agents that might attack plastic. Have your device repaired at the service centre or by qualified specialist personnel using original manufacturer parts only. If the plug or lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. The warranty for this appliance is for 3 years from the date of purchase. [. . . ]