User manual PARKSIDE PABS 10.8 A1 LITHIUM-ION CORDLESS DRILL

[. . . ] Introduction / General safety advice for electrical power tools Maximum drill diameter: Steel: Wood: the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working. [. . . ] This precaution is intended to prevent the device from unintentionally starting. When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. There is the danger of fire if other types of rechargeable battery units are used. B) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire. C) When they are not being used, store rechargeable battery units away from paperclips, coins, keys. Nails, screws or other small metal objects that could cause the contacts to be bridged. Shortcircuiting the contacts of a rechargeable battery unit may result in heat damage or fire. D) Fluids may leak out of rechargeable battery units if they are misused. A workpiece held in a clamp or vice is kept more securely in place than one held by your hand. Harmful / noxious dusts generated from your work represent a risk to the health of the person operating the device and to anyone near the work area. High reaction torques may occur momentarily during tightening or loosening of screws. If the inserted tool jams, switch off the electrical power tool immediately. The inserted tool may jam if the electrical power tool is overloaded or is held at an angle to the workpiece. [. . . ] Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. Defective or worn out rechargeable batteries must be recycled according to Directive 2006 / 66 / EC. dispose of batteries and appliances over the existing collection facilities. [. . . ]