User manual PARKSIDE KH 3166 HOT AIR GUN

[. . . ] Electrical power tools create sparks, which can ignite dusts or fumes. C) Keep children and other people away while you are operating the electrical tool. Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. [. . . ] Loose clothing, jewellery or long hair can become trapped in moving parts. G) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Always place your heat gun down on its end, with the nozzle pointing upwards. When taking a break from your work, before carrying out any tasks on the device itself (e. Changing the nozzle) or when you are not using the device, always pull the mains plug out of the mains socket. Maintain a distance between the jet outlet nozzle and the workpiece or the surface being heated. The heat produced could reach to inflammable articles located out of the visible area. Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. To avoid the danger of injury, burning and dangers to your health: J If danger arises, pull the mains plug immediately out of the mains socket. If the device is not used carefully, it can give rise to increased risk of fire or explosion. A) remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. [. . . ] If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. The Cold-Air Setting I is suitable for: - Drying varnish / paint - Cooling of heated workpieces - Cooling the appliance before storage / changing the nozzles removing the heat shield: CAUTIOn!The appliance must be completely cooled down before you remove or put on the heat protector. When you are working without the heat shield 3 there is an increased risk of burns. [. . . ]