User manual PARKSIDE KH 3125 CORDLESS MULTI-GRINDER

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools. Page Inserting / removing the battery pack into / out of the drill / grinder . The following pictograms are used in these operating instructions / on the device: Read instruction manual! [. . . ] When you have inspected and inserted the attachment, position yourself and bystanders away from the plane of the rotating attachment and run the device at maximum speed for one minute. Use a full face visor, safety goggles or safety glasses, depending on the application. Wear a dust mask, hearing protectors, safety gloves or special apron capable of stopping particles of the grinding medium or workpiece, as appropriate for the task. Eyes must be protected from the flying debris which can arise from some operations. Dust or breathing masks must be capable of filtering out the dust generated by the application. Anyone entering the work area must wear personal protective equipment. Fragments of the workpiece or of a broken attachment could fly off and cause injury beyond the immediate working area. General safety advice for grinding, sanding (with sandpaper), wire brushing, polishing and disc-cutting: a) This electrical power tool is intended for use as a grinding, sanding, wirebrushing, and disc-cutting machine. Observe all the safety advice, instructions, information in figures and all other information you received with this device. If you do not observe the following advice it could lead to electric shock, fire and / or serious injury. C) Do not use any accessory not specifically intended by the manufacturer for this electrical power tool. Although an accessory may fit on your electrical power tool, this does not on its own guarantee that it can be safely used. D) The maximum permitted speed of an attachment must be at least as high as the maximum speed indicated for the electrical power tool. An accessory rotating faster than its permitted speed could disintegrate or fly off. E) The external diameter and the thickness of the attachment must be compatible with the dimensions of your electrical power tool. General safety advice for electrical power tools Ing work where there is the danger of the attachment striking hidden electricity cables or the device's mains lead. Contact with a live wire could cause metal parts of the device to become live and lead to electric shock. If you lose control of the device the mains lead may become severed or trapped and your hand or arm may be pulled into the rotating attachment. D) Work particularly carefully in the area of corners, sharp edges etc. Such attachments create frequent kickback and loss of control of the electrical power tool. This causes the electrical power tool (if not controlled) to move in the opposite direction to the direction of rotation of the attachment at the point of constraint. General safety advice for electrical power tools Special safety advice relating to grinding and disc-cutting A) Always use the guard designed for the type of abrasive consumable you are using. [. . . ] Switching on and off / Setting the speed range Switching on / Setting the speed range: Set the ON / OFF switch 1 to a position between "2" and "10". Inserting / removing the battery pack into / out of the drill / grinder Advice on working with materials / Tools / Speed ranges Use the highest speed when working on steel or iron with the milling bits. Use a short trial on a test piece to determine the optimum rotational speed range for working on zinc, zinc alloy, aluminium, copper and lead. Use the low speed range for working on plastics and low-melting point materials. [. . . ]