User manual PARKSIDE KH 3119 HOT GLUE GUN

[. . . ] Voltage: Frequency: Nominal capacity: Insulating class: Glue sticks: 240 V A/C 50 Hz 30 W (500 W) II 11 mm HOW TO USE 1. To heat the device we recommend connecting the power line with the charging station and inserting the plug into the outlet. 3 to 4 minutes ­ the control indicator ¶ on the handle ² will illuminate. [. . . ] Do not use the device in the proximity of highly inflammable or potentially explosive materials. In order to avoid damaging the trigger, only pull this when the glue has melted completely. It is imperative that the glue gun is allowed to cool down completely on the relevant stand before it is packed away. Do not use in combination with water, steam, rain, a humid environment or highly inflammable gases or liquids. Avoid any contact with non-earthed parts, such as pipes or other electrical appliances. Check the mains lead from time to time and get it renewed at a service centre if required. For your safety, we recommend that it is imperative for you to wear safety glasses or to use a protective shield. During pauses in work remove your finger from the trigger and pull out the mains plug. Keep it clean, dry and free from oil or lubricating greases. USES FOR YOUR GLUE GUN Figure : The glue gun has an integrated stand. Use this especially for preheating (as described in the section on »How to use«) and for cooling the gun. If you set the gun down on its stand during a pause in working, pull out the mains plug and do not leave the gun unattended. After application of the glue, press the parts to be joined immediately together and hold the glued connection for about 30 seconds. As materials such as metals cause rapid cooling of the glue, we recommend that you preheat the articles using the heat gun. When bonding HR foam always apply glue to the respective counter or carrying part (e. g. [. . . ] Beaver Electronic Services · The Lodge, Premier Business Park Long Street, Walsall · West Midlands, WS2 9DY Tel. : 08707876177 · Fax: 01922/725417 Warranty This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase to the closest service address. [. . . ]