User manual PARKSIDE KH 3040 AIR SANDBLASTING GUN

[. . . ] To help you do this, please read the accompanying operating instructions. If you pass the air sandblasting gun on to anyone else, please ensure that you also pass on all the documentation. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. [. . . ] J never use oxygen or other combustible gas as the J never exceed the maximum working air pressure of Air source before carrying out any repairs or maintenance of the device or moving it to another location. Disconnect the device from the compressed air source before filling it with blast medium. J Use only materials for the blast medium that are suitable for the air sandblasting gun. J Take precautions to ensure that other people are not contaminated (dust generation). J ensure that the spent blast medium is trapped and collected so that it can be disposed of in an environmentally compatible manner. NOTe: Operate the air sandblasting gun 1 only with cleaned, condensate- and oil-free compressed air and never exceed the maximum working air pressure at the device of 8 bar. NOTe: The compressed air source must be fitted with a (filter) / pressure reducer so that the air pressure can be regulated. J Connect the air sandblasting gun to a suitable compressed air source by connecting the quick-release coupling of the air supply hose with the plug-in nipple 3 to the air sandblasting gun 1 . Fill the blast medium container 4 with the desired amount of blast medium. ensure that the maximum capacity of the container (1000 ml) is not exceeded. Screw the blast medium container 4 back on and lock it in place by inserting and turning it on to the container lid (see Figs. J Carefully mask or tape off everything that is not to be sand blasted. J Ensure that there is always a minimum distance of 20 cm between the air sandblasting gun 1 and the surface being sand blasted. J After you finish work, disconnect the device from the compressed air source. [. . . ] The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries. If this product has been subjected to improper or inappropriate handling, abuse, or interventions not carried out by one of our authorised sales and service outlets, the warranty will be considered void. The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. [. . . ]