User manual PARKSIDE KH 3027 MULTI-FUNCTION TOOL

[. . . ] ON / OFF switch Oscillation speed setting wheel Dust extraction port Ventilation slots Tool mount Clamping screw with washer Plunge saw blade Allen key Sanding sheet Backing plate Segment saw blade Adapter for external vacuum extraction Reducer piece The preferred materials on which the device can be used are: wood, plastic, drywalling, non-ferrous metals, fixings (e. Introduction / General safety advice for electrical power tools Multi-function tool Plunge saw blade Clamping screw with washer (prefitted) Allen key Backing plate Sanding sheets Segment saw blade Operating instructions The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. [. . . ] Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. E) When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Safety advice relating specifically to this multifunction tool j When working , hold the electrical Power tool firmly with both hands and keep a proper footing and balance. A workpiece held in a clamp or vice is kept more securely in place than one held by your hand. Do not touch the mains lead if it becomes damaged or cut through while you are using the device. Pull the plug out of the mains socket immediately and have the device repaired by a suitably qualified person or at your service centre. [. . . ] J Pull off the adapter for external vacuum extraction 12 (with the reducer piece 13 if used). It has been carefully produced and meti-culously checked before delivery. Contact your service centre by telephone in case of questions pertaining to the warranty. This warranty applies only to the initial purchaser and is non-transferable. [. . . ]